Use of the remote control
Note: For most buttons pressing a button once will activate the function. Pressing a second time will
When a button enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list.The list will be removed automatically after 6 seconds or press OK to remove immediately.
POWER button
Press to turn on/off the TV from or to standby mode.
Note:When the TV is turned on by the main supply, the blue indicator light will blink for
45 seconds.This is the lamp’s
.to turn on the TV.
AV button
Press this button repeatedly to select AV1,AV2,AV3, HDMI, SIDE or TV when in TV mode, according to where you connected the accessory devices
(p.
and 
button
Multimedia browser functional buttons (p.24).
DEMO button
Demo menu on/off. See p. 9.
CLOCK button
On/off and Time display (for max. 10 minutes)
(Color) buttons
When functions attached to the color buttons, the color buttons are shown on screen.
button
No function.
MENU button
Settings menu on/off, see p. 9.
VOL +/– button
Press + or - to adjust the volume.
A/CH
Press to alternate between the currently viewed channel and the previously viewed
channel.
*The quality and accuracy of the information on the information banner are transmitted from broad- casters. You may see a difference in broadcast time if the broadcaster is from a different time zone area.
FORMAT
Press this button to display a list of available display formats (depending on the receiving signal). Refer to the section on "Picture Formats" (p.20)
MY CONTENT button
"My Content" menu on/off, see p. 6.
*INFO
Display information: Press to display
(when available) information about the selected TV channel and program or accessory device.
OK - to activate a setting
-to display the list of channels stored (according to the selection made in the Installation mode (Antenna or Cable), p. 7.
≤≥<> (cursor) buttons
Press the cursor buttons up/down, left/right to navigate through the menus.
CH +/– Channel selection button
-To browse through the TV channels or sources stored in the preferred channel list (see p. 19).
-To select between Antenna or Cable TV channels, first make your selection in the Settings menu, see, p. 7.
Note:You don’t have to start the installation again once you have searched for and stored the available TV channels.
MUTE button
To turn on/off sound.
0 to 9 (NUMERIC) buttons
To select TV channels or enter values in the
• button
To enter values for minor channels e.g. 36.4
5
Downloaded from www.Manualslib.com manuals search engine