Philips 34PW981799 user service Sleep Timer, On Timer, Time Zone

Page 25

Sleep Timer

With the Sleep Timer function you can set a time period after which the TV will turn itself off.

&Select Sleep Timer with the cursor down.

éPress the cursor right to set the time.

The counter runs from 0 up to 180 mins (in 5-min increments). When set to 0, the sleep timer is turned off.

One minute before the sleep timer expires, a message appears that the TV will turn off in 60 seconds or you may cancel the sleep timer by pressing the OK button.You can always turn off your TV earlier or change the set time.

On Timer

Note: The On Timer function is only available if time information is available via the local PBS channel.

The On Timer function allows you to set a time to power your TV on automatically at a certain time of day. It can be set to work once, or daily at the same time.

The TV will turn on at the channel which was tuned when it was turned off.

&Select On Timer with the cursor down.

éPress the cursor right.

“Select Once, Daily or Off to set the On Timer for one-time operation, daily operation or Off.

‘When you have selected Once or Daily, press the cursor right.

(Enter the time with the digit buttons or with cursor up/down.

Also enter AM (A) or PM (P) with the cursor up/down. Invalid digits can not be entered.

§Press the OK button to return to the On Timer menu item.

If a valid hour has been entered, and the minutes are left blank, 00 is automatically entered for the minutes spaces.

Note: If the On Timer has never been set, then the number-entry spaces are dash marks.

If the On Timer has been set at any time previously, then the time last saved is shown, even if the On Timer is set to Off.

Time Zone

This function allows you to select your local time zone. Broadcasted time information will correct the clock display for your local time.

&Select Time Zone with the cursor right.

éSelect your local time zone.

Use of the menus 25

Image 25

Contents Dear Philips product owner Benefits you’re entitled toImportant Safety Instructions Contents Preparation Your remote controlPreparation ‘ Remote ControlPreparation To use the menus and the menu system Puck is always present when the menu system is displayedMenu system Pipes, balls and a puckList controls Interaction barsConfirmation prompt or OK buttons Press the Menu Ï button on the remote control InstallationSelect the menu language Store TV channelsUse of the remote control Use of the remote controlPower Exit Natural MotionActive Control Auto Buttons Switching screens in Dual ScreenSound PicturePicture menu Use of the menusBrightness ColorDisplay Format not selectable for digital signals via AV4 Color temperatureColor Enhancement not available for digital signals via AV4 Auto PictureSound menu Sound ModeTreble BassPro Logic with Dolby Surround broadcasting 3D SurroundChannels menu TV Ratings Lock Some bad language Movie Ratings LockPG-13 Under ageImportantYou have forgotten your PIN Set/Change PINSpeakers Center ModeSurround Speakers Test Tone and Trim Controls Menu Background GeneralFreeze Format not available for digital signals via AV4 Multi-PIP Format not available for digital signals via AV4Caption Service When Multi-PIP 12 is activated, Closed Caption is disabledClosed Captions On Timer Sleep TimerTime Zone Reset AV Settings Tilt AdjustDaylight Saving Keypad on top of the TV SourceDual Screen/PIP Dual Screen / PIPMulti-PIP Multi-PIPVideo Cassette Recorder Connect Accessory DevicesVCR and Cable Box If your VCR has an S-VHS video jackSatellite Receiver VCR with other AV peripheralsInterconnect your VCR with an extra RF cable AV3 in Cvbs and Y-Pb-Pr and Y/CDVD player with Component Video Output Connectors DVD player with AV connectorsSatellite Receiver with a VCR DVD PlayerAV4 Digital High Definition input Peripherals connected to AV3Camera and Camcorder HeadphonesHeadphone socket has a 3.5 mm mini stereo jack Adjust the volume of the audio amplifier Set the audio amplifier’s volume to minimumConnect External Speakers / Amplifier Stereo amplifier and two extra Front speakersSetting the remote control to work accessory devices VCR Control buttons To select connected devicesVCR buttons Record with your VCR RecordRecord a TV program Record to VCR from Monitor OUTCable Remote Code No Amplifiers Remote Code NoCD Players Receivers Remote Code NoVCR Satellite Remote Code NoDigital Video Disc Remote Code No Before Calling Service Before calling ServiceIf your problem is not solved Tips Tips & IndexIndex Glossary GlossaryCvbs LEDDomicile Veuillez contacter philips á Philips Consumer Electronics CompanyFlorida Central U.S.A Tennessee Georgia Texas IllinoisWestern U.S.A Michigan MID-ATLANTIC North Carolina Dallas AreaWhat is EXCLUDED? Make Sure YOU Keep What is COVERED?Where is Service AVAILABLE? Before Requesting Service To GET Warranty Service