Philips 34PW981799 user service Peripherals connected to AV3, AV4 Digital High Definition input

Page 33

	AV 3
	IN	VIDEO
		VIDEO
Pr		L AUDIO
Pb		R AUDIO

Y S VIDEO

AV 4

IN

VIDEO 1080i - 2Fh

Pr / R

H Pb / B L

V Y / G R

AUDIO

Peripherals connected to AV3

There are three possible ways to connect your Accessory Devices to the AV3 input.

&• In case of a peripheral with CVBS output, connect the video cable to the video input of the TV.

•In case of a peripheral with S-VHS output, connect the video cable to the S-VIDEOinput of the TV.

•In case of a peripheral with component video cables, connect them to the Pb, Pr and Y inputs AND also connect a video cable to the video input (in order to have correct picture reproduction).

éAlways connect the audio cables to the peripheral’s AUDIO L and R jacks and to the L AUDIO and R AUDIO AV3 jacks on the TV.

AV4 Digital High Definition input

When you have a Digital Antenna cable connected to a digital Set top Box, connect the Set top Box to the AV4 IN VIDEO 2 Fh input.

Connect a Set top Box with 2 Fh RGB output to the H, V, R, B and G jacks and to the L and R AUDIO jacks.

Connect a Set top Box with 2Fh Pr, Pb,Y output to the Pr, Pb and Y jacks and to the L and R AUDIO jacks.

See also the manual of your High Definition Set top Box.

Note: This television is designed to accept high definition signal standards 480p and 1080i, as specified by the Electronic Industries Association standard EIA770.3. Set-top boxes from different manufacturers have the possibility of differing output standards which may cause difficulties for the television to properly display.

Warning: in case you notice scrolling images, wrong colors or no color, no picture, or even combinations of these on your screen, check if the connections are done in the right way:

- for Y, Pb, Pr 2Fh: check if the cable colors match with the input connector colors

-for RGB-HV 2Fh: check additionally if the H and V cables are connected to the respective H and V input connectors, and if necessary exchange both connections.

Connect Accessory Devices 33

Image 33

Contents Dear Philips product owner Benefits you’re entitled toImportant Safety Instructions Contents Preparation Your remote control‘ Remote Control PreparationPreparation To use the menus and the menu system Puck is always present when the menu system is displayedMenu system Pipes, balls and a puckInteraction bars List controlsConfirmation prompt or OK buttons Press the Menu Ï button on the remote control InstallationSelect the menu language Store TV channelsUse of the remote control Use of the remote controlPower Exit Natural MotionActive Control Auto Buttons Switching screens in Dual ScreenSound PicturePicture menu Use of the menusBrightness ColorDisplay Format not selectable for digital signals via AV4 Color temperatureColor Enhancement not available for digital signals via AV4 Auto PictureSound menu Sound ModeTreble BassPro Logic with Dolby Surround broadcasting 3D SurroundChannels menu TV Ratings Lock Some bad language Movie Ratings LockPG-13 Under ageImportantYou have forgotten your PIN Set/Change PINCenter Mode SpeakersSurround Speakers Test Tone and Trim Controls Menu Background GeneralFreeze Format not available for digital signals via AV4 Multi-PIP Format not available for digital signals via AV4When Multi-PIP 12 is activated, Closed Caption is disabled Caption ServiceClosed Captions Sleep Timer On TimerTime Zone Tilt Adjust Reset AV SettingsDaylight Saving Keypad on top of the TV SourceDual Screen/PIP Dual Screen / PIPMulti-PIP Multi-PIP Video Cassette Recorder Connect Accessory Devices VCR and Cable Box If your VCR has an S-VHS video jackSatellite Receiver VCR with other AV peripheralsInterconnect your VCR with an extra RF cable AV3 in Cvbs and Y-Pb-Pr and Y/CDVD player with Component Video Output Connectors DVD player with AV connectorsSatellite Receiver with a VCR DVD PlayerAV4 Digital High Definition input Peripherals connected to AV3Headphones Camera and CamcorderHeadphone socket has a 3.5 mm mini stereo jack Adjust the volume of the audio amplifier Set the audio amplifier’s volume to minimumConnect External Speakers / Amplifier Stereo amplifier and two extra Front speakersSetting the remote control to work accessory devices To select connected devices VCR Control buttonsVCR buttons Record with your VCR RecordRecord a TV program Record to VCR from Monitor OUTCable Remote Code No Amplifiers Remote Code NoCD Players Receivers Remote Code NoSatellite Remote Code No VCRDigital Video Disc Remote Code No Before calling Service Before Calling ServiceIf your problem is not solved Tips & Index TipsIndex Glossary GlossaryCvbs LEDDomicile Veuillez contacter philips á Philips Consumer Electronics CompanyFlorida Central U.S.A Tennessee Georgia Texas IllinoisWestern U.S.A Michigan MID-ATLANTIC North Carolina Dallas AreaWhat is EXCLUDED? Make Sure YOU Keep What is COVERED?Where is Service AVAILABLE? Before Requesting Service To GET Warranty Service