Philips RealFlat CTV w/DBX Stereo manual Press the VCR Record button, Press the Auto Sound button

REMOTE USE WITH ACCESSORY DEVICES - CODE ENTRY METHOD
ow that you have looked up the
Nthree-digit Remote Code Number
for your brand of device, you are ready
to follow the four simple steps below.
Please read through steps 1-4 before
beginning.	1
Place the TV/VCR/ACC Mode
Switch in the proper position.
Press the VCR • RECORD button			3
on the remote control and release.
Press the AUTO SOUND button
on the remote within 30 seconds, then
release.	VCR
Enter the THREE-DIGIT
REMOTE CODE NUMBER for your
desired device. The remote is now
ready to send commands to the unit.	Satellite Receiver	2
Point the remote at the Device.	or DBS, DVD		VOL
Press the POWER button on the remote
to turn the unit ON.			4
	Cable Converter
SMART HELP			5
Remember, if this doesn’t work
the first time, repeat the steps
using a different remote code number.
After a second try and the remote does
not operate your device, see if there is
another three-digit code number (pages
36-38) listed for your device and repeat
the steps above using the new number.
If after repeated attempts the code num-
ber method does not work you device,
try the SEARCH METHOD on the next
page.
	34