Philips RealFlat CTV w/DBX Stereo manual TV Displays Wrong Channel or No Channels Above

Page 40

TROUBLESHOOTING TIPS

Please make these simple checks before calling for

service. These tips can save you time and money since charges for TV installation and adjustment of customer controls are not cov- ered under your warranty.

No Power

No Picture

No Sound

Unusual Screen

Coloring

Remote Does Not Work

TV Displays Wrong

Channel or No

Channels Above 13

CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or TV information channel) which shows a constant non-moving pattern on the TV screen, can cause picture tube damage. When your TV is continuously used with such a source the pattern of the non-moving portion of the game could leave an image permanently on the picture tube. When not in use, turn the video source OFF. Regularly alternate the use of such video sources with normal TV viewing.

Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into outlet and push POWER button again.

Check that outlet is not on a wall switch. Be sure fuse is not blown on AC Power strip.

Check antenna connections. Are they properly secured to the TV's 75Ω plug?

Check the TUNER MODE control for CABLE or ANTENNA setting.

Check Audio/Video Input jack connections if using a VCR or other external device.

Check the VOLUME buttons.

Check the MUTE button on the remote control.

Check Audio/Video Input jack connections if using a VCR or other external device.

Turn the TV OFF for several seconds, then power the set back ON.

Unplug the TV for FIVE minutes. Plug the TV back into the AC outlet and power the TV ON. This should correct the problem.

Check the Picture menu options for proper control settings.

Pressthe Auto Picture button on the remote to change the color options. If the color resets itself, readjust the Picture menu option control.

Check batteries. Replace with AA Heavy Duty (Zinc Chloride) or Alkaline batteries if necessary.

Clean the remote and the remote sensor window on the TV.

Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into outlet and push POWER button again. Be sure fuse is not blown on AC Power strip.

Check to be sure TV outlet is not on a wall switch.

Repeat channel selection.

Add desired channel numbers (CHANNEL control) into TV memory.

Check to be sure the TUNER MODE control is set to the CABLE option.

Cleaning and Care

To avoid possible shock hazard be sure the TV is unplugged from the electrical outlet before cleaning.

When cleaning the TV screen take care not to scratch or damage the screen surface (avoid wearing jewelry or using anything abrasive). Wipe the front screen with a clean cloth dampened with water. Use even, easy, vertical strokes when cleaning.

Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water. Use a clean dry cloth to dry the wiped surfaces.

Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marring of the cabinet finish.

40

Image 40
Contents For fast help, call us first Warranty Verification Important Safety Instructions Table of Contents HOW to USE the Picture Adjustment Controls HOW to USE the DNR Noise Reduction Control HOW to USE the Contrast + Black Stretch Control Button turn the Contrast + featurePress the Cursor UP or CUR SOR Down button until the wordHOW to Adjust the Bass , Treble , Balance Controls Or Left button to adjustPress the Cursor UP or CUR SOR Down button until the word Words TREBLE, Bass or BalanceHOW to USE the AVL Automatic Volume Leveler Control Button to set the Incredible Surround INCR. Surround widensSetting the TV for SAP Secondary Audio Programs Press the Cursor UP or Cursor Down button to scrollSetting the TV to Receive Stereo Programming HOW to USE the Timer Controls Press the Clock button onOver the next few pages you’ll learn how to block channels Understanding the Autolock ControlsSetting UP the Autolock Access Code HOW to Block Channels Enter your Access Code toView a tuned channel that is Blocked with Block ChannelHOW to Clear ALL Blocked Channels AT the Same Time XxxxHOW to Block ALL Channels AT the Same Time Press the Cursor UP or Down button until AutoLock is Blocking Programming Based on Movie RatingsPress the Cursor UP or Down button to highlight Blocking Programming Based on TV Ratings Press the Cursor UP or Down button to highlight the desiredUsing the Auotlock Blocking Options Blocking OptionsHOW to USE the Closed Caption Control Using the AUDIO/VIDEO Input Jacks Using the AUDIO/VIDEO Monitor Output Jacks Connect one end of the S-VIDEO Connect other end of the STurn the VCR and the TV on Press the CH + or buttons on Press the Play buttonUsing the Component Video Input Jacks Slide the TV/VCR/ACC Switch to the ACC positionConnect the Component Y, Pb Connect the red and white AudioUsing the Side Input Jacks and the Headphone Jack Press its Play buttonPress the Sleep button on Press the Sleep button repeatedlySetting the Auto Picture Control Press the Auto Picture buttonPress the Auto Sound button on Setting the Auto Sound ControlPress the Auto Sound button Using the Quadra Surf Buttons CH ButtonRepeatedly pressing the same COL Frownie face button will allow youPlace the TV/VCR/ACC Mode Point the remote control atRemote control number for your brand Find your Three-Digit Code on pages 36-38Press the VCR Record button Press the Auto Sound buttonEnter the THREE-DIGIT Remote Code Number for your Point the remote at the DeviceRemote USE with Accessory Devices Search Method Change ChannelsRemote Control Direct Entry Codes Cable Code BOX Numbers SatelliteVCR Numbers Digital Code Video Disc Numbers Using the REMOTE’S VCR Buttons Clock TV/VCR ButtonTroubleshooting Tips TV Displays Wrong Channel or No Channels AboveGlossary to Television Terms IndexRenewed