Philips PR1910B1 warranty Hooking UP Your TV ANTENNA/CABLE Connections, Antenna, Channels, Uhf/Vhf

HOOKING UP YOUR TV (ANTENNA/CABLE CONNECTIONS)

ANTENNA

COMBINATION UHF/VHF

Acombination antenna receives normal broadcast

channels (VHF 2-13 and UHF 14-69). Your connection is easy since there is only one 75Ω (ohm) antenna jack on the back of your TV - and that’s where the antenna goes.

If your antenna has a round connector (75Ω ), then you're ready to connect it to the TV.

If your antenna has flat twin-lead wire (300Ω ), you first need to attach the antenna wires to the screws on a 300 to 75Ω adaptor.

Push the round end of the adaptor (or cable) onto the ANT(enna) IN jack on the back of the TV. If the round end of the adaptor or cable is threaded, screw it down tight.

SMART

HELP

To set the TV to select only the channel num- bers in your area, see Auto Install on page 4.

Combination

VHF/UHF

Antenna

(Outdoor or

Indoor)

300 to 75Ω Adaptor

Twin-lead

Wire

OR

ANT.IN

Round Cable 75Ω

Back of TV

SEPARATE UHF/VHF

You may have two separate antennas. One antenna is for VHF channels (2-13) and the other antenna is for UHF

channels (14-69).

For homes with separate UHF/VHF antennas, you will need an optional combiner before you can connect the antennas to the TV.

Attach the separate UHF and VHF antennas to the correct screws on the combiner.

Push the round end of the combiner onto the ANT(enna) IN jack on the back of the TV.

SMART

HELP

To order any optional accessory, contact your dealer. Or, call 1-800-851-8885 and refer to the fol- lowing part num- bers to order.

• UHF/VHF

Combiner:

4835 466 97016

• 75-300Ω

Adaptor:

M61009

• 300-75Ω

Adaptor:

U/V Combiner

4835 218 27003

Outdoor UHF Antenna
(Twin-lead 300Ω )
	Twin-lead
	Wire		Round
			End
			UHF
			300Ω
Outdoor VHF			VHF
Antenna
(Twin-lead 300Ω )
	OR
	Ω	ADAPTOR
			ANT.IN
	300
	-
	75
Outdoor VHF	75-300ΩAdaptor
Antenna
(Round cable 75Ω )
			Back of TV
			- 2 -