Kreisen KR-370T owner manual Displayable Monitor Specification, RGB Mode / DVI Mode, Resolution

Displayable Monitor Specification

RGB Mode / DVI Mode

MODE	Resolution	Horizontal	Vertical
		Frequency (KHz)	Frequency (Hz)
DOS	720X400	31.469	70.08
		37.927	85.03
		31.500	60.00
		37.500	67.00
VGA	640X480
		37.861	72.80
		37.500	75.00
		43.269	85.00
		35.156	56.25
		37.879	60.31
SVGA	800X600
		48.077	72.18
		46.875	75.00
		53.674	85.06
		48.363	60.00
XGA	1024X768	56.476	70.06
		60.023	75.02
		68.677	84.99
SXGA	1152X864	54.348	60.05
	1280X768	47.700	60.00
WXGA		60.150	75.00
	1360X768	49.020	60.00
	1366X768	49.020	60.00
SXGA	1280X1024	63.981	60.02
MAC	832X624	49.725	74.55

(Synchronization input form : separate)

Note:

a.If the set is cold, there may be a small “flicker” when the set is switched on. This is normal, there is nothing wrong with the set.

b.If possible, use the VESA 1,024x768@60Hz video mode to obtain the best image quality for your LCD monitor. If used to PC vertical frequency 85Hz, some noise can be seen when PIP is on. In this case, set the PC vertical fre- quency to 60Hz. The set has been pre-adjusted to the mode VESA 1,024x768@60Hz.

c.Some dot defects may appear on the screen, like Red, Green or Blue spots. However, this will have no impact or effect on the monitor performance.

d.Do not press the LCD screen with your finger for a long time as this may produce some temporary distortion effects on the screen.

e.When the PC screen appears on the set, a message may appear on the screen, and the message will differ accord- ing to the Window system version (Win98, 2000). If a mes- sage appears click “Next” until the message finishes.

f.If the message “Out Of Range” appears on the screen, adjust the PC as in the ‘Displayable Monitor Specification’ section.

40