Connecting peripheral equipment
Depending on the versions, the TV set is equipped with 2 or 3 SCART connectors EXT1, EXT2 and EXT4 located on the rear.
The EXT1 connector has audio video inputs/outputs and RGB inputs. The EXT2 connector has audio video inputs/outputs and
The EXT4 connector (if available) has audio video inputs/outputs and RGB inputs.
Video recorder
CABLE
EXT 2
VCR
Other equipment
CABLE 
Carry out the connections shown opposite, using a good quality euroconnector cable.
If your video recorder does not have a euroconnector socket, the only connection possible is via the aerial cable.You will therefore need to tune in your video recorder's test signal and assign it programme number 0 (refer to manual store, p. 5).
To reproduce the video recorder picture, press 0.
Video recorder with decoder
Connect the decoder to the second euroconnector socket of the video recorder.You will then be able to record scrambled transmissions. See also the Decoder menu (page 6).
Satellite receiver, decoder, DVD, games, etc. Carry out the connections shown opposite.
To optimise picture quality, connect the equipment which produces the RGB signals (digital decoder, games, etc.) to EXT1 or EXT4, and the equipment which produces the
To select connected equipment
Press the µ key to select EXT1, EXT2,
Most equipment (decoder, video recorder) carries out the switching itself.
Side connections
S•VIDEO
VIDEO 
AUDIO 
* 
Make the connections as shown opposite.
With the µ key, select EXT3.
For a mono set, connect the sound signal to the AUDIO L (or AUDIO
R)input.The sound automatically comes out of the left and right speakers of the set.
Headphones
Press the m key to mute the sound on the TV set (see also sound settings, page 6).
The headphone impedance must be between 32 and 600 Ohms.
Amplifier (only available on certain versions)
To connect to a
AUDIO |
10