Quick installation
The first time you switch on the television, a menu appears on the screen and the tuning starts automatically.
Main •
Install •
Auto Store • 
Searching
Please Wait
Prog. found 3 525,25 MHz
If the menu is not displayed, press and hold down the ”- and ”+ keys on the TV set for 5 seconds to start the tuning.
All the available TV programs will be stored. This operation takes a few minutes.The display
shows the progress of the search and the number of programs found.
At the end of the search, the menu disappears. To exit or interrupt the search, press H. If no program is found, consult the possible solutions p. 12.
&If the transmitter or cable network sends the
automatic sort signal, the programs will be numbered correctly. In this case, the installation is complete.
éIf this is not the case, you need to use the Sort menu to number the programs correctly. Some transmitters or cable networks broadcast
their own sort parameters (region, language, etc.). In this case, indicate your choice using the <> keys and validate with ≥.
Program sort
&Press key H.The Main menu is displayed on the screen.
Main • |
|
|
|
Install • |
|
|
|
Language • |
|
|
|
Country • |
|
|
|
00 |
| ||
Auto Store • |
| 01 | BBC1 |
Manuel Store • |
| 02 | BBC2 |
Sort • |
| 03 ÆANGLI | |
Program • |
| 04 | CH4 |
Name • |
| 05 | CH5 |
|
|
| |
éWith the cursor, select the Install menu
followed by the Sort menu.
“Select the programme you want to move using
the <> cursor and press ≥.
‘Then use the <> cursor to select the new
number and validate with ≤.
(Repeat steps “ and ‘ for each program you
wish to renumber.
§ To quit the menus, press d.
Program name
If required, you can give a name to the programmes and external connectors. Note : on installation, the programs are named automatically when an identification signal is sent.
&Press the H key.
éWith the cursor, select the Install menu, then
Name.
“Use the @ P # keys to select the programme to name or rename.
‘Use the ≤≥ cursor to move around the name display area (5 characters) and the <> cursor to select the characters.
(When the name has been entered, use the H
cursor to exit.The name is stored.
§Repeat steps “ to ( for each programme you wish to name.
è To quit the menus, press d.
4