Remote control keys

Standby To set the TV to standby mode.

To switch the TV set on again, press b, P @ # or 0 9.

Select peripherals (p.10) Press several times to select the required EXT connector.

List of programmes To display/clear the list of programmes. Use the <>cursor to select a programme and the ≥ cursor to display it.

The symbol +is displayed alongside all programmes which are locked (p.7).

NEXTVIEW: refer to the separate booklet (only available on certain models).

Cursor

These 4 keys are used to move around the menus (<>≤≥).

Freeze the picture

Mute To mute or restore the sound.

Volume

VCR DVD SAT AMP CD

Ÿ	¢
Y Select	†

· ¢ Ê Æ

œ π ‡

Surround Sound

To activate / deactivate the surround sound effect. In stereo, this gives the impression that the speakers are further apart. For models equipped with Virtual Dolby Surround*, you can experience Dolby Surround Pro Logic sound effects.

Mode selector (p. 11)

To activate the remote control in TV, VCR, DVD, SAT,AMP or CD mode.

Teletext keys (p. 8) or VCR / DVD (p.11).

Teletext (p. 8).

unused key.

To call up or exit the menus.

Programme selection

To access the next or previous TV channel from the list of Favourite Programmes (see p. 5).

To adjust the sound level.

Screen information To display / remove the programme number, the name (if it exists), the time, the sound mode and the time remaining on the timer. Hold down for 5 seconds to permanently display the programme number on the screen.The volume level and the smart control adjustments are then displayed each time they are used.

Active Control (according to the version) Optimizes the quality of the picture according to the quality of reception.

Dual screen (according to the version) To activate/disable the display on 2 screens. The second screen displays teletext.

” [ P

1 2 3

4 5 6

7 8 9

Ë 0 ù

ACTIVE

` K

SMART CONTROL

SMART

-ª

Digit keys

Direct access to the programmes. For a 2 digit programme, enter the 2nd digit before the dash disappears.

Sound mode

Used to force programmes in Stereo and Nicam Stereo to Mono or, for bilingual programmes, to choose between Dual I or Dual II. The Mono indication is red when in forced position.

Sleeptimer

To select the length of time before the set automatically switches to standby (from 0 to 240 minutes).

16:9 Format (p. 9).

Smart picture and sound

Used to access a series of predefined picture and sound settings.

The personal position relates to settings selected from the menus.

*Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbols are trademarks of Dolby Laboratories.