Philips MS3652S, MS3252S owner manual Remote USE with Accessory Devices Direct Method, Vcr

Page 28

2 Point the remote control at the device and press the POWER button.

3 Does the remote turn the device ON? If YES, stop and try other function buttons on the remote. If they also work the device, then the remote is ready and no further steps are needed.

If NO, continue...

First look up a THREE-DIGIT remote con- trol number for your brand of device before going through the simple steps on the follow- ing page.

Find your three-digit code on pages 28-33.

HELPFUL HINT

Remember, if more than one code is listed for your brand of device, you may have to try more than the first three-digit code given in order to locate your device’s remote code.

NOTE: The remote is for use with external accessory devices only and not for use with other brands of TVs.

Place the TV/VCR/ACC Mode Switch in the proper position (VCR or ACC for other devices) for the device you want to control.

REMOTE USE WITH ACCESSORY DEVICES - DIRECT METHOD

Your remote control can work your TV and some VCRs, Cable Boxes, Satellite

Systems, DBS, DVD Players, etc. However, an easy one-time step may be necessary before the remote will work your other equipment.

Try this initial check to see if you need to go to the following section.

1

1

VCR

Satellite Receiver

Cable Converter

	SLEEP
	A/CH	STATUS/EXIT	CC
TV RECORD		2	3
VCR	1	2	3
VCR

ACC

4 5

7 8

SMART

0

SOUND2

ER

POW

EP	CK
SLE	CLO
XIT	CC
XIT
TUS/E
H STA	CR
A/C	CR
	TV/V
ORD
REC
TV
VCR
ACC
		ART
		SM
	ART	TURE
	SM	PIC
	ND	RF
	ND	SU
	SOU
	ENU
	M
			CH
		VOL	UTE
		VOL	M

28

Image 28

Contents MS3252S MS3652S AHurry Important Safety Instructions Table of Contents HOW to USE the Picture Adjustment Controls Press the Menu button onHOW to USE the DNR Noise Reduction Control Press the Menu button on the remoteHOW to USE the Contrast + Black Stretch Control HOW to Adjust the TREBLE/BASS BOOST, Balance Controls HOW to USE the AVL Automatic Volume Leveler Control Setting the TV to Receive Stereo Programming HOW to USE the Timer Controls Press the Clock button onUnderstanding the Smartlock Controls SmartLock offers various BLOCK- ING controlsSetting UP the Smartlock Access Code Press the button to displayEnter your Access Code to View a blocked channel HOW to Block ChannelsPress the Number or CH +, but HOW to Clear ALL Blocked Channels AT the Same Time Or, enter your Access Code to view a blocked channelHOW to Block ALL Channels AT the Same Time Blocking Programming Based on Movie Ratings Press the or button to highlightBlocking Programming Based on TV Ratings TV-MAUsing the Smartlock Blocking Options 10turned on or OFF using the orPress the CC button on the remote to HOW to USE the Closed Caption ControlNot all TV programs and commercials Using the Side AUDIO/VIDEO Input Jacks Using the AUDIO/VIDEO Input JacksConnect one end of the Video yellow Connect the red and white Audio Using the AUDIO/VIDEO Monitor Output JacksFor Second VCR Connect one end of an S-VIDEO Using the S-VIDEO Input JackTurn on the VCR and the TV Press the Sleep button on Setting UP the Sleeptimer OptionPress the Sleep button repeatedly to Setting the Smartpicture Control Press the Smart Picture buttonSetting the Smartsound Control Press the Smart Sound button onUsing the Surf Button and the Alternate Channel Button Press the Channel + or buttonRemote USE with Accessory Devices Direct Method VCRRemote USE with Accessory Devices Code Entry Method Place the TV/VCR/ACC ModePress the Power button on Accessory Devices Search MethodRemote USE with Remote Control Codes VCR Code noRemote Control Direct Entry Codes Cable Convertercode noUsing the REMOTE’S VCR Buttons Set the TV/VCR/ACC mode switchTroubleshooting No PowerCare and Cleaning Glossary of Terms Index Factory Service Locations CanadaHouston LOS Angeles Limited Warranty