Philips MS3652S, MS3252S owner manual Troubleshooting, No Power

Page 34

TROUBLESHOOTING

No Power

•Check the TV power cord. Unplug the power cord, wait 10 seconds, then reinsert the plug into the outlet and push the POWER button again.

•Check that the outlet is not on a wall switch.

•Be sure the fuse is not blown on the AC power strip if one is being used.

No Picture

•Check the antenna connections. Are they properly secured to the TV's ANT 75Ω plug?

•Check the TUNER MODE control for the correct tuner set- ting.

•Try running the Auto Program feature to find all available channels.

No Sound

•Check the VOLUME buttons.

•Check the MUTE button on the remote control.

•If you’re attempting to hook up auxiliary equipment, check the audio connections to the TV from the other device.

Remote Does Not Work

•Check the batteries. If necessary, replace them with AA Heavy Duty (Zinc Chloride) or Alkaline batteries.

•Clean the remote control and the remote control sensor on the front of the TV.

•Check the TV power cord. Unplug the power cord, wait 10 seconds, then reinsert the plug into the outlet and push the POWER button again.

•Be sure the fuse is not blown on the AC power strip, if one is being used.

•Check to be sure the power outlet is not on a wall switch.

TV Displays Wrong Channel or No Channels Above 13

•Repeat channel selection.

•Add the desired channel numbers (using the CHANNEL EDIT control) into the TV’s memory.

•Check to be sure TUNER MODE is set to CABLE if you have Cable TV service. Run the Auto Program feature to find all available channels.

Channels 1-125 can be possible only if you have Cable TV service. If you are using an Antenna, only channels 2-69 can be possible.

34

Image 34

Contents MS3252S MS3652S AHurry Important Safety Instructions Table of Contents HOW to USE the Picture Adjustment Controls Press the Menu button onHOW to USE the DNR Noise Reduction Control Press the Menu button on the remoteHOW to USE the Contrast + Black Stretch Control HOW to Adjust the TREBLE/BASS BOOST, Balance Controls HOW to USE the AVL Automatic Volume Leveler Control Setting the TV to Receive Stereo Programming HOW to USE the Timer Controls Press the Clock button onUnderstanding the Smartlock Controls SmartLock offers various BLOCK- ING controlsSetting UP the Smartlock Access Code Press the button to displayEnter your Access Code to View a blocked channel HOW to Block ChannelsPress the Number or CH +, but HOW to Clear ALL Blocked Channels AT the Same Time Or, enter your Access Code to view a blocked channelHOW to Block ALL Channels AT the Same Time Blocking Programming Based on Movie Ratings Press the or button to highlightBlocking Programming Based on TV Ratings TV-MAUsing the Smartlock Blocking Options 10turned on or OFF using the orPress the CC button on the remote to HOW to USE the Closed Caption ControlNot all TV programs and commercials Using the Side AUDIO/VIDEO Input Jacks Using the AUDIO/VIDEO Input JacksConnect one end of the Video yellow Connect the red and white Audio Using the AUDIO/VIDEO Monitor Output JacksFor Second VCR Connect one end of an S-VIDEO Using the S-VIDEO Input JackTurn on the VCR and the TV Press the Sleep button on Setting UP the Sleeptimer OptionPress the Sleep button repeatedly to Setting the Smartpicture Control Press the Smart Picture buttonSetting the Smartsound Control Press the Smart Sound button onUsing the Surf Button and the Alternate Channel Button Press the Channel + or buttonRemote USE with Accessory Devices Direct Method VCRRemote USE with Accessory Devices Code Entry Method Place the TV/VCR/ACC ModePress the Power button on Accessory Devices Search MethodRemote USE with Remote Control Codes VCR Code noRemote Control Direct Entry Codes Cable Convertercode noUsing the REMOTE’S VCR Buttons Set the TV/VCR/ACC mode switchTroubleshooting No PowerCare and Cleaning Glossary of Terms Index Factory Service Locations CanadaHouston LOS Angeles Limited Warranty