Philips TS3658, TS3258 manual Connect the S-VIDEO, Turn the VCR or Digital Video Disc Player on

HOW TO USE THE AUDIO/VIDEO INPUT JACKS

S-VIDEO INPUT

The S(uper)-Video connection on the rear of the television can give you better picture detail and clarity, for the playback of S- VHS VCR tapes, or Digital Video Discs than the normal antenna picture connections.

Note: The VCR (or Digital Video Disc player) must have a S- VIDEO OUT(put) jack in order for you to complete the connec- tions shown on this page.

BEGIN

Connect the S-VIDEO

CABLE to the S-VIDEO input jack on the rear of the television, then the AUDIO (red and white) to the AUDIO IN (IN 2) jacks on the rear of the TV.

Connect the S-VIDEO

CABLE to the S-VIDEO output jack on the accessory device. Then connect the red and white AUDIO CABLES to the AUDIO (left and right) output jacks on the rear of the accessory device.

NOTE: Repeatedly pressing the AV button on the remote will toggle the picture source from the current chan- nel (Tuner A or B), to the SVID-R connection, to the AV 1 connection, to the AV 2 connection.

This also applies to the Multi Media button on the remote. Repeatedly pressing the Multi Media button will toggle the picture source from the current channel (Tuner A or B), to the MM 1 (SVID-R) connection, to the MM 2 (AV 1) connection, to the MM 3 (AV 2) connection.

24

AV 1

AV 2

SVID-R

	BACK OF TV
			1
S-VIDEO CABLE	S-VIDEO
(NOT SUPPLIED)	VIDEO
	L
ANT "A"	AUDIO
75	R/MONO
		IN-2	OUT
		AUDIO IN
		(RED/WHITE)
VIDEO IN			2
(YELLOW)
ANT/CABLE	S-VIDEO	R	L
	OUT	AUDIO OUT
OUT
		BACK OF ACCESSORY

Turn the VCR (or Digital Video Disc Player) ON.

4

SLEEP

POWER

3

Press the AV button on the remote to tune to the SVID-R channel. You are now ready to view the tape or disc on the TV.

SMART HELP

The S-VIDEO and VIDEO IN-2 Inputs are in

parallel. The S-VIDEO input is dominate when in use. If seperate video signals are connected to the S-Video and the VIDEO IN-2 Inputs, the signal from the VIDEO IN-2 input will be unuseable.

If you have added SVID-R to the TV’s channels memory, just press the CHANNEL + or – buttons to select the S-VIDEO mode.

TV	AV	STATUS/EXIT	CC	TV/VCR-CLOCK
VCR	VCR	INCREDIBLE	MULTI	A/CH
			UP
ACC	RECORD	STEREO	MEDIA
	SMART			SMART
	SOUND			PICTURE
	MENU			SURF
	VOL			CH
		MUTE

DSS, DVD, Video Game, etc.

(EQUIPPED WITH S-VIDEO AND

AUDIO OUTPUT JACKS)

IF YOU ARE USING A

MONO DEVICE, USE

ONLY THE AUDIO

R/MONO JACK.