Philips TS3658, TS3258 manual Tips if Something Isnt Working

Page 32

TIPS IF SOMETHING ISN'T WORKING

Please make these simple checks before calling for ser-

vice. These tips can save you time and money since charges for TV installation and adjustment of customer controls are not cov- ered under your warranty.

No Power

No Picture

No Sound

Remote Does Not

Work

TV Displays Wrong

Channel or No

Channels Above 13

TV Displays

Black Box

CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or TV information channel) which shows a constant non-moving pattern on the TV screen, can cause picture tube damage. When your TV is continuously used with such a source the pattern of the non-moving portion of the game (CDI, etc.) could leave an image permanently on the picture tube. When not in use, turn the video source OFF. Regularly alternate the use of such video sources with normal TV viewing.

•Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into outlet and push POWER button again.

•Check that outlet is not on a wall switch. Be sure fuse is not blown on AC Power strip.

•Check to be sure the system mode switch (TV/VCR/ACC) is in the correct position when using the remote control to power the set ON.

•Check antenna connections. Are they properly secured to the TV's ANT/CABLE plug ?

•Check the TUNER control for CABLE or ANTENNA setting.

•Press the AV button on the remote to make sure the correct signal source is selected. (AV 1, AV 2, SVID-R or MM 1, MM 2, MM 3)

•Check the VOLUME buttons.

•Check the MUTE button on the remote control.

•Check the SPEAKER on-screen control. OFF position will eliminate sound at the set.

•If attempting auxiliary equipment hook-ups, check audio jack connections.

•(If Applicable) Check Audio Receiver for correct operating mode.

•Check TV/VCR/ACC “System” switch on the remote. Move the switch to the TV position to operate the television.

•Check batteries. Replace with AA Heavy Duty (Zinc Chloride) or Alkaline batteries if necessary.

•Clean the remote and the remote sensor window on the TV.

•Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into outlet and push POWER button again.

•Check to be sure TV outlet is not on a wall switch.

•Repeat channel selection.

•Add desired channel numbers (CHANNEL control) into TV memory.

•Check to be sure the TUNER control is set to the CABLE option.

•Check CLOSED CAPTION in menu and turn TEXT Mode OFF.

Cleaning and Care

•To avoid possible shock hazard be sure the TV is unplugged from the electrical outlet before cleaning.

•When cleaning the TV screen take care not to scratch or damage the screen surface (avoid wearing jewelry or using anything abrasive). Wipe the front screen with a clean cloth dampened with water. Use even, easy, vertical strokes when cleaning.

•Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water. Use a clean dry cloth to dry the wiped surfaces.

•Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marring of the cabinet finish.

Page 31 Page 33
Image 32
Page 31 Page 33
Contents
DFU Warranty Verification Safety Instructions Read before operating equipment Table of Contents Features Standard broadcast VHF/UHF or Cable TVHOW to Adjust the TV Picture Use the Cursor LeftCursor UP or Cursor Setting the TV’S ClockPress the Numbered buttons Activating the TV’S on Timer Control Press the Menu button onSelecting the TV’S on Timer Channel Buttons to select the desired channelSetting the TV’S on Timer Start Time Use the Cursor UP or CURSetting the TV’S on Timer Display Using the Smart Lock Setup Code Control Nel without knowing your Access code or changing it to aParents it isn’t possible for Your child to unblock a chanUsing the Smart Lock Block Channel Control Press the Channel + orTurning on the Noise Reduction Picture Control Turning on the Contrast + ControlUsing the Closed Caption Control Text Mode TXT1, TXT2,TXT3, TXT4, or OFFUsing the Sleep Timer Control SleepUsing TREBLE, BASS, and Balance Sound Controls Press the Cursor Down button to select the SoundHOW to SET the TV for Stereo Programs Press the Cursor Down Button to select the StereoUsing the Incredible Stereo Feature Using the TV Volume BAR ControlPress the Volume + or Press the Volume + or butUsing the TV Speaker Control and Audio Output Jacks Press the Cursor Down button to select the SpeakerHOW to USE the AUDIO/VIDEO Input Jacks Connect the Video yellowTurn the VCR and the TV Use the A/V button onConnect the S-VIDEO Turn the VCR or Digital Video Disc Player onUsing Smart Picture ControlPress the Smart Picture Press the Smart Picture button repeatedly to select eitherPress the Smart Picture button repeatedly to turn the fea Using the Smart Sound ControlPress the Smart Sound but Using the TV’S Channel Surf Control Press the Channel + orPress the Surf button on Press the Cursor LeftPoint the remote control at Remote control number for yourPlace the TV/VCR/ACC Find your Three-Digit Code on pagesPress the VCR Record Press the Smart SoundEnter the THREE-DIGIT Point the remote at Place the TV/VCR/ACC Setting the Remote Control to Work with Other Devices Press the Power button on Remote Control Direct Entry Codes Remote Vcrcode noRemote Dvdcode no Using the REMOTE’S VCR Buttons Rewind ButtonTips if Something Isnt Working Glossary to Television Terms IndexPhilips Consumer Electronics Company Georgia North Carolina Illinois Limited Warranty
Top Page Image Contents