Display panel symbols/messages
English
The following symbols/messages may appear on your recorder display:
00:00
Multifunction display/text line
–Title/track number
–Total/elapsed/remaining title/track time
–Disc/title name
–Error or warning messages
–Additional information regarding the disc
–TV channel number or source of video
–Clock (This is displayed in Standby mode).
–TV programme title
¡
Tuner is selected as visible source.
Camara mode is the current active source.
COMPATIBLE
The recorder is busy making changes to make the disc
COPY PROT
The DVD/video cassette you are trying to copy is
CREATE MENU
After the first recording has been successfully complete on a new disc, the menu structure is created.
DISC ERR
An error occurred when writing the title. If this happens often, clean the disc or use a new one.
DISC FULL
Disc is full. There is no storage space for new recordings.
Disc is the current active source.
Hard disk is the current active source.
TV
Modulator is turned off. The antenna signal (RF signal) is only connected to the TV when the modulator is turned off.
D
Remote control command for the recorder has been received.
X TIMER
A timer recording has been programmed or is active.
! SAT
The recorder is prepared for satellite recording.
BLOCKED
The disc tray cannot be opened or closed due to some mechanical obstruction.
CLOSING
Disc tray is closing.
DISC UPDATE
–Updating of disc is done after the editing is complete.
–Entire disc is being erased.
DISC WARN
An error occurred when writing the title. The recording will continue, but the error will be skipped.
EMPTY DISC
Inserted disc is new or has been completely erased (no recordings present).
EMPTY TITLE
An empty title was selected.
EPG DOWNLOAD
Downloading of TV listing data is in progress.
FINALISE
The DVD±R disc is being finalised. The progress bar on the LED shows the status of the finalisation process.
INFO DVD
Information on the inserted DVD is displayed on the TV.
90
dvdr5350H_EU_Eng537.indd 90 |