RECORDING
Adding new recordings
Adding new recordings after other recording sessions.
Press [RECORD] to start recording, and press [ 
STOP] at the point you want to stop.
Note:
Each new recording session is placed after the previous session unless a certain recording title is set to be overwritten. (Reference the “Overwrite” function in the “Editing” section for additional details.)
Playback the last recorded title (on HDD only)
Press [uPLAY] or [ 
GUIDE] to start the playback of the last recorded title .
This function is only available when the desired title resides on the HDD.
Using [uPLAY]
1.Press [uPLAY] and the last recorded title will start playback.
Using [ 
GUIDE]
1.Press [ 
GUIDE] and select the “PLAYBACK” icon.
2.Confirm that the playback device is HDD.
3.Press [p] [q] to go to the “Last Record” icon and press [OK]. The playback will start.
Change Chapter Intervals
Creating chapters while recording
The DVD recorder can automatically divide a session into chapters by inserting chapter marks at
1.Press [SYSTEM MENU] to display the system menu.
2.Press [p] [q] to select the “RECORD” and press [u].
3.Press [p] [q] to select “CHAPTER MARK” to set up the interval time.
4. Press [SYSTEM MENU] to exit the system menu.
Notes:
1.During recording, press [EDIT] to add chapter mark(s) in the recorded session manually.
2.You can also start recording using the “Guide Menu.”
Press [
GUIDE], select “RECORD” and press [OK]. Follow the steps to set the recording mode.
3.Before you start, please ensure that the DVD disc or hard disk has enough available space for the recording session.
4.You cannot change the channel or recording mode during recording.
Notes:
1.If a power failure occurs, the program you are recording may be lost.
2.Before you start, please check that the DVD disc or hard disk has enough available space for the recording.
3.You can not change the recording mode during recording.
4.Before playing a DVD+R disc on another player, you first need to finalize the disc.
22