Philips DVDR520H/75 One-touch recording, DV recording, Before you start to record DV contents

RECORDING

One-touch recording

Use “One-touch recording” to start recording immediately in 30- minute blocks. Press [RECORD] twice to start a 30-minute recording session. Press [RECORD] repeatedly to record longer timed recordings, up to 6 hours in thirty-minute increments. Pressing [RECORD] when the timed recording exceeds the 6- hour constraint automatically sets “one-touch recording” off. For recording on DVD discs, the length of recording depends on the current recording mode/speed and the amount of time available on the disc. For recording on the built-in HDD, the length of recording is 6 hours maximum.

DV recording

Before you start to record DV contents

This DVD recorder allows basic DV control functions with the remote control. The DVD recorder is equipped with a camcorder control (Play, Stop, FF or REW) feature via the DV Link connection. Simply move the screen cursor to the desired function on the DV input screen and press [OK] on the remote control.

Use “Guide Menu” to record DV signal

1.Power on your TV and this DVD recorder.

2.Connect the DV cable (IEEE-1394 4-pin to 4-pin cable) to both the DV Camcorder and the DVD- Recorder.

3.Power on the DV Camcorder. Start “Playback mode” on the DV Camcorder.

4.“Pause” the DV Camcorder at where you want to record.

5.Press [ GUIDE] on the remote control. This activates the Guide menu.

6.Press [p] [q] to select the “RECORD” icon, and press [OK] to start recording.

7.Press [p] [q] to select “DV” and press [OK] to confirm.

8.Press [p] [q] to select HDD or DVD and press [OK].

9.Press [p] [q] to set the recording quality, and press [OK] to confirm.

10.Press [OK] to start recording.

Notes:

This DVD-Recorder will stay in “Pause” mode when no DV input signal is detected.

11.To pause recording.

Press [ PAUSE ] on the remote control to pause recording.

Press [ PAUSE ] again, if you want to resume recording.

12.To stop recording.

Press [ ] to stop recording.

Note:

Before playing a DVD+R disc on another player, you will first need to finalize the disc. Reference the “finalize” function in the “Disc Tools” section for additional information.

24