TIMER RECORD
9. Press [t] [u] [p][q] to select the “Start (Start
Time),” and then press [OK] .
Use the numbered buttons (0~9) or press [p] [q] [t] [u] to enter the start time.
10. Press [t] [u] [p][q] to select “End (End Time),” and then press [OK].
Use the numbered buttons (0~9) or press [p] [q] [t] [u] to enter the end time.
If you enter a wrong selection
Press [t] [u] to
11.If you select “TV” in step 4, press [t] [u] [p][q] to select “SOUND (TV AUDIO)” and then press
[OK] to bring up the list.
Press [p] [q] [t] [u] and [OK] to make your selection.
12.Press [p][q] to select “OK” to save the setting for the timer record item and go back to the
Timer Record list.
Press [p] [q] [t] [u] to [RESET] if you want to reset the timer record item.
13.Press [p] [q] to go to another item on the list and press [OK] if you want to set up for more
Timer Record programs.
If not, move to the “EXIT” icon and press [OK] to exit the Timer Record List.
14.Press [
To stop recording during Timer Record
When you press [ 
STOP ] , it may take a few seconds for the record to stop.
To check the recording status while Timer Record is active
Press [DISPLAY] and the Timer Record information appears on- screen.
Notes:
1.When the Timer Record function is active, the “Timer LED” on the DVD Recorder front panel will illuminate.
2.The DVD recorder must be turned off to activate the Timer Record function.
Timer Record using the G-Code® system
1.Press [
2.Press [TIMER] to display the “Timer Record” menu.
3.Press [p][q] to select an item from the timer setting list and press [OK] to activate the setup menu for the Timer Record function.
4.Press [t] [u] [p][q] to select the
Or press [
5.Press [t] [u] [p][q] to select “Repeat (once, daily or weekly),” and then press [OK] to bring up
the list.
Press [p] [q] [t] [u] and [OK] to make your selection.
6.Press [t] [u] [p][q] to select the
Use the numbered buttons (0~9) or [p] [q] [t] [u] to enter the
27