Recording (continued)
English
About timer recording
Use ‘Timer Recording’ to automatically start and stop a recording at a later date/ time. The DVD recorder will tune to the right programme channel and begin recording at the specified time.
With this DVD recorder, you can preprogramme up to 8 recordings.
To make a timer recording, your DVD recorder needs to know:
–The date you want to make the recording.
–The recording input source.
–The start and stop time of the recording.
–The recording mode, see page 28.
TIMER
OK
Timer recording (manually)
ATurn on the TV power. Select the correct Video In channel at the TV.
BPress TIMER on the remote control.
The timer schedule list appears.
Timer Schedule
Source RecMode Date Start End VPS 
1
2
3
4
5
6
CPress OK on the remote control.
The VIDEO PLUS+® System menu appears.
VIDEO Plus+ System
Enter the VIDEO Plus+ programming number for the show you wish to record. Press [RETURN] to return to timer schedule or [TIMER] to exit timer.
5 
Confirm | Cancel |
D Select CANCEL in the menu and press OK.
The timer editor menu appears.
About ‘VPS/PDC’
‘VPS’ (Video Programming System) or ‘PDC’ (Programme Delivery Control) is used to control the start and duration of
Timer Editor
Source
Rec Mode
Mode
Date
Start
End
VPS/PDC
Ch003
2 Hour Mode 
Once
31 / 01 / 05
10 : 33 : 57
11 : 03 : 57
Off
TV channel recordings. If a TV programme starts earlier or ends later than was scheduled, the DVD recorder will then switch on and off at the correct time.
If you want to programme a time that is different from the VPS/PDC time, you must turn off VPS/PDC.
OK | Cancel |
EUse keys to select an entry in the menu and press to enter its options.
TIPS: Ensure that there is sufficient space available on the DVD+R/+RW before recording. You have to finalise the DVD+R before it can be played on other players, see page 36.
30
16861_dvdr3305_05_eng5.indd 30 |
