Philips DVDR3305 user manual Connecting to a VCR or other similar device

English

Optional Connections (continued)

A	VHF/UHF	VIDEO	TV OUT	TV IN	VIDEO	Back of aVCR
	RF IN
		OUT			IN	(Example only)
		AUDIO			AUDIO
Antenna/cable		L			L
	RF OUT	R			R
	VHF/UHF	AUDIO			AUDIO
TV signals

E

B

D C

TV

Connecting to a VCR or other similar device

This connection enables you to record from video tape to a DVD+R/+RW and allows the VCR to be used for playback if the DVD recorder is turned off.

AConnect the Antenna/Cable TV signal to the antenna input (RF IN) socket on the VCR.

BUse the supplied RF coaxial cable to connect the antenna output (RF OUT)

socket on the VCR to the ANTENNA socket on the DVD recorder.

CUse another RF coaxial cable to connect

the TV socket on the DVD recorder to the antenna input socket on the TV.

DUse the scart cable to connect the EXT1 TO TV-I/Osocket on the DVD recorder to the corresponding SCART input socket on the TV.

EUse another scart cable to connect the EXT2 AUX-I/Osocket on the DVD recorder to the Scart output socket (possibly labelled as TV OUT or TO TV) on the VCR.

Helpful Hints:

–Most commercial video cassettes and DVDs are copy-protected and therefore cannot be recorded.

–Connect the DVD recorder directly to the TV. If there is a VCR or an additional device in between, the picture quality may be poor because of the copy protection system built into the DVD recorder.

TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.

16

16861_dvdr3305_05_eng5.indd 16 2005-06-29 4:09:13 PM