Recording (continued)
Manual recording
Use this feature to start recording immediately (e.g., to record a TV show already in progress.)
REC
SOURCE
STOP 
REC
{Rear CVBS }
Input source from the device connected to the VIDEO
{Rear S-Video } :
Input source from the device connected to the
{DV }
Input source from the device connected to DV IN jack at the front panel.
4Press REC 0 to start recording.
➜ The recording will automatically start after the last recording on the DVD+R/+RW.
5 To stop the recording, press STOP 9.
E n g l i s h
Pausing a recording
1Turn on the TV power. Select the correct Video In channel at the TV.
2Insert a DVD+R/+RW disc into the DVD recorder.
3Press REC SOURCE on the remote control to select { Tuner }, then use 3 4 keys to select the TV channel you wish to record.
●To record from an external device, press REC SOURCE repeatedly to select the correct input channel that matches the jack which is connected to the DVD recorder.
{Front CVBS }
Input source from the device connected to the VIDEO and AUDIO L/R jacks on the front panel.
{Front S-Video }
Input source from the device connected to the
1During a recording, press PAUSE ;. ➜ You can use this function to avoid recording commercials.
2To resume recording, press REC 0.
One Touch Recording - automatic turn-off
1Follow the steps 1~3 of “Manual Recording” on pages 29.
2Press REC 0 twice to start a 30 minutes recording. Each time you press REC 0 after that, you will add 30 minutes to the recording time.
➜ The recorder will stop recording at the designated end time and turn off automatically.
●Press STOP 9 if you wish to stop the recording.
TIPS: Ensure that there is sufficient space available on the DVD+R/+RW before recording. You have to finalize the DVD+R, before it can be played on other players, see page 36.
29
001_033_dvdr3355_37A_eng5 | 29 | 21/3/05, 3:18 PM |