Philips DVDR3355 user manual Connecting, Audio cables, Option 2 Using Coaxial jack

Basic Connections - DVD recorder (continued)

E n g l i s h

OR

Option 2

DIGITAL IN

Option 1

TV

AV amplifier/ receiver

Step 3: Connecting the

Option 2: Using Coaxial jack

audio cables

This connection enables you to listen to the sound.

Option 1: Using Audio jacks

You can connect the DVD recorder to a two channel stereo system or receiver in order to enjoy the stereo sound system.

●Use the supplied audio/video cables (red/ white ends) to connect AUDIO

L/R -OUT1or -OUT2jacks to one of the following devices with the same input jacks.

–a stereo system (for example,TV or mini system.)

–a receiver with two channel analog stereo.

You can connect the DVD recorder to an AV amplifier/receiver in order to enjoy multichannel surround sound.

●Use a coaxial cable (not supplied) to connect COAXIAL jack to the device that has the same input jack (or labeled as COAXIAL IN or DIGITAL IN.)

– an AV amplifier/receiver with a digital multi-channel sound decoder

Before you start operating, set the Digital Audio Output accordingly (see page 54.) If the Digital Output setting does not match your stereo’s capabilities, the stereo may produce a strong, distorted sound or no sound at all.

Helpful Hint:

–Do not connect your TV’s audio output jacks to the AUDIO L/R (IN-EXT) jacks on this DVD recorder, this may cause unwanted noise.

TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.

14

001_033_dvdr3355_37A_eng5 14 21/3/05, 3:16 PM