Philips CDR775 S Power supply Inserting batteries in the remote control, Setup recommendations

Page 16

English

INSTALLATION

Power supply		Inserting batteries in the remote control

1 Plug the power cord supplied into the POWER SUPPLY connector on the CD recorder, then into a wall socket.

2 Press ON/OFF.

➜The CD recorder will switch on.

Note:

-If the CD recorder is in Standby mode (red LED on), press any key to activate the recorder.

-The CD recorder will automatically adjust to the local mains voltage.

-When the CD recorder is in the “OFF” position, it is still consuming some power. If you wish to disconnect your CD recorder completely from the mains, withdraw the plug from the AC Outlet.

Setup recommendations

-Place the CD recorder on a solid, vibration-free surface.

-Do not place the CD recorder near a source of heat or in direct sunlight.

-Do not use the CD recorder under extremely damp conditions.

-If the CD recorder is placed in a cabinet, make sure that a one-inch space remains free on all sides of the CD recorder for proper ventilation.

Important:

-Do not put the CD recorder on top of other equipment that will heat up the CD recorder (e.g. receiver or amplifier).

1 Open the battery compartment cover.

2 Insert 2 batteries (“AA”, LR-6 or UM-3; as supplied) as shown.

3 Replace the cover.

Note: We recommend that you use 2 batteries of the same type and condition.

Batteries contain chemical substances; they should be disposed of properly.

16

Image 16

Contents CDR775 Important Safety Instructions General Information Set complies with the FCC-Rules, Part 15 and with 21 CFRLimited Warranty CD-R PlayerContents Español Français EnglishEnglish Table of Contents Technical data About this manualGeneral AudioDiscs for recording Maintenance English AccessoriesGeneral Information and Discs Discs for playbackOperating Buttons and Connections Operating buttons on the frontEnglish CD recorderConnections at the back Operating Buttons and Connections DisplayDisplay indications Display messages Menu messages See Menu mode Display InstallationConnections general Analog connections CD player deck Installation Use the digital coaxial cable suppliedSetup recommendations Power supply Inserting batteries in the remote controlPress ON/OFF CD recorder will switch on Remote Control Remote control commandsInserting discs Number/alphabet keys 0Recording Remarks about recording Recording modesFor recording from internal CD-deck For recording from external sourcesPreparing for high speed recording Start high speed recordingPreparing for Listen mode recording Listen mode recording from internal CD playerStart Listen mode recording Manual recording from external CD player Preparing for manual recordingStop the source Start recordingPreparing for autostart recording If you wish to record a complete disc or programFinalizing CDR & Cdrw discs PlayingUnfinalizing Cdrw discs To erase one or more tracks from the end Erasing Cdrw discsTo erase the entire disc Play a 2-disc changer Changer mode Playing CDs on Deck 1 and/or Deck 2 DJ modeSelecting a track when CD play is stopped Hold down 5 or 6 in play modeSelecting a track SearchShuffle random order play Only in Changer modeRepeat CD, track or program Programming Remarks about programmingProgramming for playback Clearing a programMenu Mode Remarks about Menu modeGeneral operation of Menu Press Easy JOG/ENTER to confirm selectionsEnglish Text input/text edit Menu MODE/CD TextErasing text/text erase Reviewing CD Text in memory/memory view Balance only active in Record/Standby mode Menu MODE/RECORDING SettingsEnglish Auto track increment/auto track Fixing Problems English 3104 125