Preparing for autostart recording

English

RECORDING

Autostart recording from external CD player

CD-SYNC

OPEN // CLOSE

PLAY // PAUSE

STOP

REC

RECORD

EXT

TYPE

FINALIZE

ERASE

SOURCE

CDR

ANALOG

CDR 77X

AUDIO CD RECORDER

PROG

SHUFFLE

DISPLAY

PHONES

SCROLL

REPEAT

DJ MODE

The CD-SYNC feature enables you to make fast and easy recordings of a CD. Track increments are automatically detected from the source material. Track increments cannot be added manually. In analog source material a silence of 2.7 seconds or more is automatically detected as a track increment.

1 Make sure the disc is absolutely free of scratches and dust particles.

2 Press EXT(ernal) SOURCE repeatedly until (depending on the digital connection used):

➜DIGITAL I, OPTICAL I or ANALOG lights up and DIGITAL 1, OPTICAL or ANALOG will appear on the display.

REM REC	TIME TRACK	TOTAL REM	TRACK TIME	STEP
SYNC MANUAL		RECORD		PROG
DIGITAL I	CD	CHANGER	CD	SHUFFLE ALL
OPTICAL I	RW		RW	REPEAT
ANALOG	RW		RW	SCAN TRACK
ANALOG				SCAN TRACK
3 With the CD recorder stopped,			press REC TYPE four times

if you wish to record a complete disc or program.

➜d and SYNC will start to flash and the display will show REC EXT DISC and WAIT followed by the track number, the total remaining time and START SOURCE.

REM	REC	TIME TRACK	TOTAL REM	TRACK	TIME			STEP
SYNC MANUAL			RECORD			PROG		ALL
DIGITAL I		CD	CHANGER		CD	SHUFFLE		ALL
OPTICAL I		RW			RW	REPEAT	TRACK
ANALOG		RW			RW	SCAN
ANALOG						SCAN

•If input label (DIGITAL I) flashes, the digital connection is incorrect.

Start recording

1 To start recording, press PLAY on the selected source.

➜The CD recorder automatically starts to record and d lights up continuously. The track number and track time will appear on the display.

•If, however, you start the source during a track, CD-SYNC recording starts at the beginning of the next track or after 2.7 seconds of silence in analog recordings.

•To check the remaining recording time on the CDR(W), press DISPLAY. (This can also be done during recording.)

•The EASY JOG/ENTER key can be used to adjust the recording level.

•The recorder stops automatically.

2 To stop recording manually, press STOP on the CD recorder.

➜UPDATE lights up and SYNC and d go out.

•If STOP 9 is pressed within 3 seconds after pressing PLAY, no recording will take place.

•To interrupt recording, press PAUSE on the CD recorder.

➜d starts to flash. (Autostart recording is disabled.) To resume, press RECORD on the CD recorder.

After recording the display will show UPDATE for several seconds.

Note:

-Recordings from DAT, DCC or analog sources will only stop after 20 seconds of silence.

-Auto track is always active.

Important:

If you want to play the recorded CDR disc on a regular CD player, it must be finalized. See finalizing discs.

Finalized CDRW discs play only on CDRW compatible CD players.

For recording from CD changers always use REC EXT DISC.