Philips BDL4631V user manual Way II Mount the monitor on the wall, To avoid monitor from falling

Page 16

User Manual BDL4631V/00

To avoid monitor from falling

Take measures to prevent the monitor from falling over in case of an earthquake or other disaster might occur to lessen the probability of injury and damage.

As shown in the figure below, secure the monitor to a solid wall or pillar using rope (commercially available) strong enough to bear the weight of the monitor(BDL4631V: approx. 34.6 kg). Screw hooks (commercially available), of ring type rather than C-shaped screw hooks (with opening), are recommended.

Screw Holes

Screw hook

Rope

 

Clamper

* Clamper and Screw here is not supplied.

Screw

Caution:

Though the recommended prevention from falling is intended to lessen the probability of injury and da mage, it doesn’t assure its effectiveness against any kind of earthquake or disaster.

Before moving the monitor, remove the rope that is securing the monitor.

Way II: Mount the monitor on the wall

Before mounting the monitor to the wall, make sure that the system has been power-off and you have obtain a standard wall-mounting kit (commercially available). Using mounting interface that comply with TÜV-GS and/or UL1678 standard in North America is recommended.

Protective Sheet

Table

 

Handles

Tabletop stand

 

 

 

 

1.Lay a protective sheet on a table, which was wrapped around the monitor when it was packaged, beneath the screen surface so as not to scratch the screen face.

2.This device cannot be used or installed without the Tabletop Stand or other mounting accessory. Make sure all these stuffs are ready for wall- mount installation.

3.Follow the instructions that come with the base mounting kit. Failure to follow correct mounting procedures could result in damage to the equipment or injury to the user or installer. Product warranty does not cover damage caused by improper installation.

4.For the wall-mounting kit, use M6 mounting screws (having a length 10 mm longer than the thickness of the mounting bracket) and tighten them securely. (Recommended torque: 470 - 635N•cm).

Caution:

For preventing the monitor from falling.

Install the monitor with metal brackets for wall or ceiling installation (commercially available) on your own responsibility. For detailed procedures of installation, refer to the instructions of the metal brackets.

To lessen the probability of injury and damage resulting from fall of the monitor in case of earthquake or other disaster, be sure to consult the bracket manufacturer for installation location.

To lessen the risk of falling of the monitor, thread commercially available rope (having a load capacity at least 1960N (200kgf)) through the handles at the right and left of the monitor and secure the rope to the wall mount brackets or ceiling mount brackets.(Refer to the first paragraph of this page.)

13

Image 16
Contents Philips Professional Business Solutions Table of Contents Page Safety Instructions Regulatory Information CE Declaration of Conformity Polish Center for Testing and Certification Notice Information for UK only 环保使用期限 North Europe Nordic Countries Information Contents Elements Name and Functions Control PanelTerminal Panel Audio OUTRemote Control Power buttonOperating Range for the Remote Control Handling the remote controlHow to Mount or Attach Feet to the LCD Monitor Way 1 Attach and remove the optional feetWay II Mount the monitor on the wall To avoid monitor from fallingVentilation Requirements for enclosure locating Setup Procedure Recommended Adjustment Adjust the imageTo prevent the main power switch from being changed Install the LCD Monitor in Portrait Mode How to set-upConnectivity Connectivity DiagramBefore making connections Connecting to a Personal Computer Connecting the LCD Monitor to a Personal ComputerConnecting to a Digital Interface Equipment Connect the LCD Monitor to a Computer with a Digital OutputConnecting to a DVD Player Connect the LCD Monitor to a DVD PlayerConnecting to a Stereo Amplifier Connect the LCD Monitor to a Stereo AmplifierPower on and OFF Modes Pressing the Main Power SwitchPressing the power button Using the remote controlPower Indicator Using Power ManagementDisplay Signal of Video Source Setting to Video Picture SizeSmart Picture Mode Audio Source SwitchingControl Lock Mode OSD InformationOSD On-Screen-Display Controls Brightness ContrastSharpness Black LevelPicture Reset Color TemperatureColor Control Zoom Mode PositionScreen Reset Custom ZoomAudio Reset BalanceTreble BassPIP Size PIP ResetPIP Audio Language Power SavePanel Saving Configuration Reset Factory ResetSleep Timer OSD Turn OFFInformation OSD OSD H PositionMonitor Information Advanced Option Gamma SelectionIR Control Keyboard ControlTiling Date and TimeAdvanced Option Reset ScheduleMonitor ID DDC/CIImage Sticking of LCD Panel For long life use of Public DisplayRecommendations Remote control numbering function SUB Hdmi PC-A CVI Videos MainFeatures SRGB Color ControlTroubleshooting Remote Control is not available SCHEDULE/SLEEP Timer function is not working properlyNo Signal is displayed on the screen No SoundSpecifications Specifications BDL4631VPin Assignment SDA