Mounting on a Wall | Philips BDL4210Q, BDL4610Q, BDL3210Q instruction

BDL3210Q / BDL4210Q / BDL4610Q

1.5.Mounting on a Wall

To mount this display to a wall, you will have to obtain a standard wall-mounting kit (commercially available).We recommend using a mounting interface that complies with TUV-GS and/or UL1678 standard in North America.

1.Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as not to scratch the screen face.

2.Ensure you have all accessories for mounting this display (wall mount, ceiling mount, table stand, etc).

3.Follow the instructions that come with the base mounting kit. Failure to follow correct mounting procedures could result in damage to the equipment or injury to the user or installer. Product warranty does not cover damage caused by improper installation.

4.For the wall-mounting kit, use mounting screws and tighten them securely.The mounting screw type and length are as below:

BDL3210Q	M4, Length: 12mm~16mm
BDL4210Q	M6, Length: 12mm~14mm
BDL4610Q	M6, Length: 12mm

1.5.1. VESA Grid

BDL3210Q	100(A) x 200(B) mm
BDL4210Q / BDL4610Q	400(A) x 400(B) mm

Caution:

To prevent the display from falling:

•For wall or ceiling installation, we recommend installing the display with metal brackets which are commercially available. For detailed installation instructions, refer to the guide received with the respective bracket.

•To lessen the probability of injury and damage resulting from fall of the display in case of earthquake or other natural disaster, be sure to consult the bracket manufacturer for installation location.

Ventilation Requirements for enclosure locating

To allow heat to disperse, leave space between surrounding objects as shown in the diagram below.

	100 mm
100 mm	100 mm
	100 mm