Philips user manual Input Mode, VGA Resolution BDL3210Q, BDL4210Q/BDL4610Q, Sdtv Resolution

BDL3210Q / BDL4210Q / BDL4610Q

5.Input Mode

VGA Resolution:

BDL3210Q:

Standard	Active Resolution		Refresh Rate	Pixel Rate	Aspect Ratio	Refers to
Resolution	H Pixels	V Lines
VGA	640	480	60 Hz	31.5 MHz	4:3	Video Graphic Array
WVGA	720	400	70 Hz	31.3 MHz	16:9	Wide Video Graphic Array
SVGA	800	600	60 Hz	37.9 MHz	4:3	Super VGA
XGA	1024	768	60 Hz	48.3 MHz	4:3	Extended Graphic Array
WXGA	1360	768	60 Hz	47.7 MHz	16:9	Wide XGA
BDL4210Q/BDL4610Q:
Standard	Active Resolution		Refresh Rate	Pixel Rate	Aspect Ratio	Refers to
Resolution	H Pixels	V Lines
VGA	640	480	60 Hz	31.5 MHz	4:3	Video Graphic Array
WVGA	720	400	70 Hz	31.3 MHz	16:9	Wide Video Graphic Array
SVGA	800	600	60 Hz	37.9 MHz	4:3	Super VGA
XGA	1024	768	60 Hz	48.3 MHz	4:3	Extended Graphic Array
WXGA	1360	768	60 Hz	47.7 MHz	16:9	Wide XGA
SXGA+	1440	900	60 Hz	55.9 MHz	16:10	Super Extended Graphics
						Array
WSXGA+	1680	1050	60 Hz	64.7 MHz	16:10	Wide Super Extended
						Graphic Array
HD1080	1920	1080	60 Hz	67.5 MHz	16:9	HD 1080
SDTV Resolution:
Standard	Active Resolution		Refresh Rate	Pixel Rate	Aspect Ratio	Refers to
Resolution	H Pixels	V Lines
480i	720	480	29.97 Hz	13.5 MHz	4:3	Modified NTSC Standard
480p			59.94 Hz	27 MHz
576i	720	480	25 Hz	13.5 MHz	4:3	Modified PAL Standard
576p			50 Hz	27 MHz
HDTV Resolution:
Standard	Active Resolution		Refresh Rate	Pixel Rate	Aspect Ratio	Refers to
Resolution	H Pixels	V Lines
720p	1280	720	50 Hz	74.25 MHz	16:9	Normal DVB Mode
			60 Hz
1080i	1920	1080	25 Hz	74.25 MHz	16:9	Normal ATSC Mode
			30 Hz
1080p	1920	1080	50 Hz	148.5 MHz	16:9	Normal ATSC Mode
			60 Hz

•For the BDL3210Q model ,the PC text quality is optimum in WXGA mode(1360x768,60Hz); for the BDL4210Q/BDL4610Q models, the PC text quality is optimum in HD 1080 mode(1920x1080,60Hz).

•Your PC display screen might appear different depending on the manufacturer (and your particular version of Windows).

•Check your PC instruction book for information about connecting your PC to a display.

•If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5KHz (horizontal). In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned off (or if the PC is disconnected). If this happens, press [INPUT] to enter video mode. Also, make sure that the PC is connected.

•Should horizontal synchronous signals seem irregular in RGB mode, check PC power saving mode or cable connections.

•The display settings table complies to the IBM/VESA standards, and are based on analog input.

•DVI support mode is regarded as the same as PC support mode.

•The best timing for the vertical frequency in each mode is 60Hz.

15