Philips 19HFL3330D/10, 22HFL3330D/10 Smartloader to TV using USB, TV to Smartloader using USB

Page 8

REMOTE CONTROL LOCKED – Enable or disable the operation of the normal remotes. However, when the High Security Mode is OFF, to enter PBS Mode Menu, using the “319753 ”” key sequence is not blocked, even when Remote Control Locked is ON.

OSD DISPLAY – Enable or disable OSD display (e.g., channel number or name, sound mode, volume bar, clock, etc.).

HIGH SECURITY MODE – choice between using normal consumer RC or PBS setup RC to display the setup menu. When enabled, only the setup RC menu key can display the setup menu. When disabled, both the setup RC menu key and normal guest remote control sequence “319753 ” can display the setup menu.

AUTO SCART – Enable (ON) or disable (OFF) autoscart switching or break-in in PBS mode.

LOW POWER STANDBY - define the power mode when TV set goes to standby by pressing RC power key or Local Keyboard power key - Green: TV will enter low standby power mode to achieve minimum power consumption; Fast: TV will enter semi-standby mode to achieve fast powering up,

4.5 BLANK CHANNEL

BLANK CHANNEL - choice of either blank or not blanking the video for the current channel. In PBS application, the blanked channel is used for off-air radio transmission, e.g., re-modulated FM radio, music CDs etc. The current blank mode should follow the channel blanked status and changing the channel blanked should also blank or unblank the current channel.

Note:Channel Blank will apply for the current channel, to navigate and blank other channels,

Blank channel submenu should be selected by clicking on right cursor key as below:

PB8

4.6 SMARTLOADER TO TV (using USB)

Copy TV configuration data (Video, Audio, Channel Table, PBS Mode settings) from USB Memory stick to TV. Upon copying progress completion, an indication message will feedback to PBS-user (“Settings copied to TV”).

Note:During copying process, the USB memory stick should not be removed to prevent any undersigned functionality of the TV.

Note:During this process, the cloning files

NVM_MTK_2K8_EU.BIN and CH_MTK_2K8_EU.BIN are retrieved by TV and update the TV NVM and Channel setup accordingly.

Note:All RC command and local keyboard will be disabled during copying process

Note:It is recommended to do a television switch off/switch on after the cloning is done.

4.7 TV TO SMARTLOADER (using USB)

Copy TV configuration data ( Video, Audio, Channel Table, PBS Mode settings[i.e.Welcome Message, …]) from TV to USB drive.

Upon copying progress completion, an indication will given as feedback to PBS-user (“Settings copied to USB”)

Image 8
Contents Philips Table of contents PBS Set-Up Remote control 2573 optional Alarm OFF22AV1104/10 SourceMheg Cancel Alarm onSleep Number Keys Virgin mode Out Of Box Setting and Initial Setup Follow the Virgin Mode guiding to set all channels/programsDisplay Setup Menus To activate PBS Mode, select onSwitch on Settings Smartloader to TV using USB TV to Smartloader using USBStore ABC Register your product and get support at Environmental care Warranty Safety EN-3Screen care Environmental carePower Your TVTV overview MenuRemote control Program up or down Volume up or downPower Source TeletextGet started Position the TVWall mount the TV BbwarningConnect cables Secure the VESA-compatible wall bracket to the TVConnect the mains cord Locate the TV Antenna connector at the back of the TVConnect the antenna cable Insert the remote control batteries Switch on the TVFirst time setup Manage cablesSwitch your TV on/off or to standby Use your TVUse teletext Watch TVWatch connected devices EN-13 DDNote for UK users onlyFor advanced information on teletext, see Remote control overview Use more of your TVSubtitle InfoAccess the main menu Smart settings Picture Sound Feature InstallUse TV menus Use the main menuPress Æ to enter the Picture settings Press Æ to enter the Brightness settingUse the Quick access menu Press ï to select BrightnessAdjust picture and sound settings Adjust picture settingsUse smart settings Picture format See .3.3 Change picture formatChange picture format Super zoom Not for HDNot for HD Movie Expand 169 Not for HDChange to Shop or Home Mode Adjust sound settingsSettings Auto volume leveling ReducesUse advanced teletext features Use Electronic Programme GuideAutomatic Adjust feature settingsSelect Features Automatically switch the TV to standby Sleeptimer Automatically switch the TV on Start timeAutomatically switch the TV off Stop time Lock TV channels or connected devices Auto LockUpdate your TV software Use subtitlesListen to digital radio channels To set parental ratingsInstall channels Automatically install channelsUpdate software digital broadcasts Check your current software versionManually install channels Install channelsSelect your country Select your system DDNoteInstallation menu Search and store new TV channels Rearrange channelsRename channels Fine tune analogue channelsUninstall or reinstall channels Manually update the channel listTest digital reception EN-27Common Interface Slot for Conditional Access Modules Connect devicesConnection overview Diaital Audio OUTSelect connection quality Hdmi Highest qualityComponent Y Pb Pr Higher quality Scart Good qualityVideo Good quality Video cable Audio L/R cable Red,WhiteComposite Basic quality EN-30DVD player Connect devicesBlu-ray Disc player Satellite receiver HD digital receiverCombined DVD recorder and digital receiver EN-32Separate DVD recorder and receiver DVD recorder and home theatre systemGame console or camcorder Personal ComputerTo connect a PC to the back of the TV EN-34Setup devices Use Philips EasyLinkPrepare TV for digital services Using the Conditional Access ModuleAccess CAM services Push the CAM in as far as it will goSupported display resolutions Computer formats PC PowerVideo formats Tuner / Reception / TransmissionTroubleshooting General TV issuesTV channel issues Picture issuesPC connection issues Sound issuesHdmi connection issues Contact us EN-40Index Screen care Settings Setup devices Sharpness Shop mode SideSmart settings TimersEN-43 EN-44 Koninklijke Philips Electronics N.V. All rights reserved