Philips BDL4680VL IR Pass-through Connection, Wire-connecting to Network, To setup the network

BDL4680VL

NOTE: This display’s remote control sensor will stop working if the [IR IN] is connected.

3.6.IR Pass-through Connection

DVD / VCR / VCD

[IR OUT] [IR IN]

(DVD / VCR / VCD)

Remote Control

3.7.Wire-connecting to Network

If you connect this display to a home network, you can play photos, music and videos from your computer. See Play multimedia files via Local Area Network (Page 17) for more detail.

INTERNET

[RJ-45]ROUTER

PC

[RJ-45]

To setup the network:

1.Switch on the router and switch on its DHCP setting.

2.Connect the router to this display with an Ethernet cable.

3.Press [] HOME button on the remote control, then select Setup.

4.Select Connect to network, then press [] button.

5.Follow the on-screen instructions to install the network.

6.Wait for this display to find the network connection.

7.If you are prompted, agree to the “End User Licence Agreement”.

NOTE: Connecting with a shielded CAT-5 Ethernet cable to comply with the EMC directive.

16