BDL4680VL
Read and follow these instructions when connecting and using your display:
•Unplug the display if you are not going to use it for an extensive period of time.
•Unplug the display if you need to clean it with a slightly damp cloth.The screen many be wiped with a dry cloth when the power is off. However, never use alcohol, solvents or
•Consult a service technician if the display does not operate normally when you have followed the instructions in this manual.
•The casing cover should be opened only by qualified service personnel.
•Keep the display out of direct sunlight and away from stoves or any other heat sources.
•Remove any object that could fall into the vents or prevent proper cooling of the display’s electronics.
•Do not block the ventilation holes on the cabinet.
•Keep the display dry.To avoid electric shock, do not expose it to rain or excessive moisture.
•When turning off the display by detaching the power cable or DC power cord, wait for 6 seconds before
•To avoid the risk of shock or permanent damage to the set do not expose the display to rain or excessive moisture.
•When positioning the display, make sure the power plug and outlet are easily accessible.
•IMPORTANT: Always activate a screen saver program during your application. If a still image in high contrast remains on the screen for an extended period of time, it may leave an
CE Declaration of Conformity
We declare under our responsibility that the product is in conformity with the following standards:
•
•EN55022:2010 (Radio Disturbance requirement of Information Technology Equipment).
•EN55024:2010 (Immunity requirement of Information Technology Equipment).
•
•
•EN 50581:2012 (Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances)
•EN 50564:2011 (Electrical and electronic household and office equipment — Measurement of low power consumption)
following provisions of directives applicable.
•2006/95/EC (Low Voltage Directive).
•2004/108/EC (EMC Directive).
•2009/125/EC (ErP,
•2011/65/EU (RoHS Directive) and is produced by a manufacturing organization on ISO9000 level.
Federal Communications Commission (FCC) Notice (U.S. Only)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help..
iii