EasyLink buttons

To use one-touch audio, you must map the audio input from the connected device to your TV.

You can use the remote control from the connected device to adjust the volume.

Remote control (RC) key forwarding RC key forwarding allows you to control EasyLink-compliant devices using your TV remote control.

You can control EasyLink-compliant devices with the following buttons on the remote control of your TV.

Button		EasyLink function
	(Play/	Starts, pauses or resumes
Pause)		playback on your EasyLink
		device.
	(Stop)	Stops playback on your EasyLink
		device.
	(Record)	Starts or stops video recording
		on your EasyLink device.
	(Fast	Searches backward.
Backward)
	(Fast	Searches forward.
Forward)
0-9		When EasyLink is enabled,
(Numeric		selects a title, chapter or track.
buttons)
		Navigates through the menus of
		the EasyLink-compliant device.
OK		Activates a selection or accesses
		the menu of the EasyLink-
		compliant device.
OPTIONS		Displays the menus of the
		EasyLink-compliant device. Note
		that when (Home) is pressed,
		the TV menu is displayed.
	(Standby-	When EasyLink is enabled,


On)		switches the TV and all EasyLink
		devices to standby. Note that
		you must press and hold


		(Standby-On) for at least 3
		seconds for this to occur.

Tip

•Press TV to switch back to the antenna source from EasyLink mode.

Enable or disable EasyLink

Note

•Do not enable Philips EasyLink if you do not intend to use it.

1Press (Home).

2Press to select [Setup] > [Con guration] > [Preferences] > [EasyLink].

3Select [On] or [Off].

Enable or disable remote control key forwarding

1Press (Home).

2Press to select [Setup] > [Con guration] > [Preferences] > [EasyLink Remote Control].

3Select [On] or [Off].

SetTV speakers to EasyLink mode

When enabled, this feature automatically turns off TV speakers when content from an EasyLink-compliant home theater system is played. Audio is played only from the home theater system’s speakers.

1Press (Home).

English

EN 21