Philips 32PFL76X5H user manual Use Philips EasyLink, Enable or disable EasyLink, EasyLink features

HDMI cable and HDMI-DVI adaptor

VGA cable

Use Philips EasyLink

Enable or disable EasyLink

NonPublish

Philips EasyLink provides several features that enable you to control devices that are connected via HDMI. Connected devices must support the HDMI-CEC standard, and must be properly configured for EasyLink to work.

Note: HDMI-CEC functionality is known by other names on other brands. Some examples are Anynet (Samsung), Aquos Link (Sharp) or BRAVIA Sync (Sony). Not all brands are fully compatible with Philips EasyLink.

To enable or disable EasyLink

Note: Do not enable Philips EasyLink if you do not intend to use it.

EN 58

1.Press .

2.Select [Setup] > [TV settings] >

[EasyLink] > [On] or [Off], then press OK.

EasyLink features

NonPublish

With Philips EasyLink enabled, the following features are available:

One-touch play

When you play content from a HDMI-CEC compliant device, the TV switches on from standby, and switches to the correct source.

One-touch standby

When you connect your TV to a HDMI- CEC compliant device, pressing on the TV remote control switches the TV and all connected HDMI devices to standby mode.