Philips 37PFL76X5H Enable or disable EasyLink Remote Control, EasyLink buttons, English

System audio control

When you connect your TV to, for example, a HDMI-CEC compliant Home Theatre System (HTS), your TV speakers automatically mute and audio from the TV plays through the HTS.

For more information about system audio control and other types of TV speaker configurations, see Connect the TV > Use Philips EasyLink > TV speakers (Page 60).

EasyLink Remote Control

EasyLink Remote Control allows you to control HDMI-CEC compliant devices using your TV remote control.

To enable EasyLink Remote Control, see Connect the TV > Use Philips EasyLink > Enable or disable EasyLink Remote Control

(Page 59).

Pixel Plus Link

Connected Philips EasyLink devices may apply their own picture quality processing to a video, before streaming it to the TV. This may interfere with the image processing of the TV. Enable Pixel Plus Link to discard picture quality processing from connected Philips EasyLink devices.

To enable Pixel Plus Link

1.Press .

2.Select [Setup] > [TV settings] >

[EasyLink] > [Pixel Plus link] > [On]. 3. Press OK to activate.

Auto subtitle shift

Auto subtitle shift displays subtitles from Philips EasyLink compliant Home Theatre Systems over the video image on your TV. The video image is thus stretched across the whole of your TV display, without the need to create a separate subtitle bar at the bottom of the screen.

To enable auto subtitle shift

1.Press .

2.Select [Setup] > [TV settings] >

[EasyLink] > [Auto subtitle shift].

3. Select [On], then press OK to activate.

Audio only mode
Audio only mode enables you to play audio	English
from a connected Philips EasyLink device
through the TV speakers while the TV is in
standby.

Press to receive audio from the connected Philips EasyLink device.

If available, audio only mode is enabled. Accept the prompt on the TV to enable audio only mode.

•Control the audio playback with the TV remote control.

Enable or disable EasyLink Remote Control

NonPublish

Caution: This is an advanced setting. Verify that all connected HDMI-CEC compliant devices support this setting. Devices that do not support this setting will not respond to commands from the TV remote control.

1.Press .

2.Select [Setup] > [TV settings] >

[EasyLink] > [EasyLink Remote Control] > [On] or [Off].

3. Press OK to activate.

Notes:

•If you cannot exit from the connected device's menu, press .

•To switch back to TV control, press and select [Watch TV].

• To control another device, press and select the device from the home menu.

•A summary of EasyLink buttons you can use with the TV remote control is available at Connect the TV > Use Philips EasyLink > EasyLink buttons (Page 59).

EasyLink buttons

NonPublish

Control HDMI-CEC compliant devices with the following buttons on the TV remote control.

•OK: Starts, pauses or resumes playback on the connected device. Also activates a selection or accesses the menu of the device.

EN 59