Philips 42PF7621D/10 Symptom Possible cause/Remedy Remote does, Not function, Connected equip

2584.3 en.qxd 29-03-2007 10:48 Pagina 54

EN		Troubleshooting (Continued)
	Symptom	Possible cause/Remedy
	The remote does	< Verify if the remote is set correctly for the equipment your are using.
	not function	< Verify if the batteries are not dead. Replace the batteries.
		You can still use the keys at the left side of the TV.
		< Select TV mode on your remote control.
		< When pressing a key and some key leds are blinking with a higher speed and
		lower intensity than in a normal working condition, and your TV does not react on
		the key press, remove the batteries out of the remote control and put them back
		again.
	The remote of	< The infrared signals of the screen may influence the reception sensibility
	connected equip-	of other peripherals.
	ment does not	Solution: replace the batteries of the remote of other peripheral
	function well	equipment.
	No photo or music	< Verify if the source complies with a supported code.
	play or in poor
	quality
	No stable or not	< Verify if you have selected the correct VGA mode in your PC.
	synchronised VGA	See Connect a PC, p. 53.
	picture	< Verify the connections between the TV and the PC.
	No solution found	< Switch off your TV off and then on again once.
	for your picture or	Never attempt to repair a defective TV yourself.
	sound problem	Verify with your dealer or call a TV technician.
	Red blinking led	< Unplug the mains cord for 10 seconds and insert it in again.
	Black bars with	< Select another picture format.
	HD channels
	No EPG data	< The Electronic Programme Guide function and background programme
	available	information are only made available by TV channels that provide EPG
		information and in countries which support EPG.
		See www.philips.com/support.

54