2584.3 en.qxd
EN |
| Annex 1 (Continued) |
|
|
|
Software Upgrade Application
Upgrade busy...
Software Id:
Loading
Validating
Programming
Done
Done
Upgrade the TV software
1.Switch off your TV and remove all memory devices.
2.Insert the USB portable memory that contains the downloaded software upgrade.
3.Switch on your TV with the power key B at the side of the TV.
4.The upgrade process starts automatically. After a few seconds the status of the upgrade procedure is displayed.
Warning:
-You are not allowed to remove the USB portable memory during the software upgrade procedure;
-In case of a power drop during the upgrade procedure, don’t remove the USB portable memory from the TV. The TV will continue the upgrade as soon as the power comes back;
-If an error occurs during the upgrade you should retry the procedure or contact your Local Customer Service Centre.
5.When the message Operation successful appears, remove the USB portable memory and restart your TV with the power switch B at the side of the TV.
Your TV will start up with the new software.
Note: once the upgrade is finished use your PC to remove the TV software from your USB portable memory.
If you need further assistance or in case of problems, please call your local Philips Customer Centre. See Philips Consumer Care on the www.philips.com/support website.
56