Philips 26PF5521D manual Safety Information, 10 cm, To prevent fire or shock hazard, do not expose

Page 3

Safety Information

 

10 cm

10 cm

10 cm

Leave at least 10 cm around each side of the TV set to allow for proper ventilation. Place the set on a stable, level surface. Never cover the ventilation slots of the TV with a cloth or other material. It may cause overheating. Do not insert anything in the ventilation holes. If metal or something flammable is inserted in these holes, it may result in fire or electric shock.

X

Take care not to connect too many equipment to the same mains socket as it may cause overloading resulting in fire or electric shock.

X

When cleaning the surface or the screen of the set, wipe gently with absorbent cotton or cloth or other soft material like chamois. Do not use too wet a cloth which is dripping with water.

Do not use acetone, toulene or alcohol to clean the TV. As a safety precaution, unplug the power cord from the mains.

X

Pull the power lead by the plug. Do not pull on the power lead. Do not use a poor fitting mains socket. Insert the plug fully into the mains. If it is loose, it may cause arching and result in fire.

X

X

To prevent fire or shock hazard, do not expose

No naked flame sources (lighted candles) should

be placed on the top of the set or near it.

your TV to rain or moisture.

 

X

Avoid placing your TV set under direct sunlight or heat.

Installation of the TV set on the wall should be carried out by qualified serviceman. Improper and incorrect installation may render the set unsafe.

As a safety precaution,do not touch any part of the TV, power lead or aerial lead during lightning storms.

X

Avoid placing vase filled with water on the TV. Water spilled into the set could result in electric shock. Do not operate set if water is spilled into it. Have it checked immediately by a qualified serviceman.

2

Image 3
Contents 26PF5521D 32PF5521D 37PF5521D 42PF5521D Introduction Table of ContentsBe placed on the top of the set or near it Safety Information10 cm To prevent fire or shock hazard, do not exposePlasma Televison keys and connectors26 /32 TV 37 / 42 TVTelevision keys and connectors For more details on connections, see Connection GuideProgram / Channel -/+ to select programmes Remote Control keys Remote Control keys DVD or AUX Overview of Digital main menu and sub-menus What is Digital Television?Setup Digital or Analogue channelsDigital Audio Output Access restrictionsPreferences Type of Selection Language LocationTest reception Installation Service listsService setup Frequency Network name Signal quality Signal strengthLanguage, corresponding Country Switch on for the first timeOn the screen.The Setup menu is displayed ‘ Select Service Scan from the menuBanner description Rearrange servicesSymbols description Understanding the information on the banner‘ Select Reinstall all services ï and press Æ key View or Listen to new servicesAdd new services Reinstall all servicesLanguage and location preferences Test receptionTo return to previous menu, press the Í key § Press Access restrictionsSetting up your favourite list From the digital mode, pressSelecting the key activates the software download Using the Options menuInformation Off Air Downloading of new softwareFrom the digital mode, press the key to display the TV guide TV guideOr No and confirm with key Recording functionPress the RED key to call up the Record menu Subtitles for hearing impaired select YesKey to allow the software download Digital Teletext MhegAvailable in all countries Numerical keysInserting the CAM Using the Conditional Access Module CAMPress the key. The TV Menu is displayed on the screen Automatic tuning of analogue programmesATS Automatic Tuning System feature Program SortNaming of Channel Manual tuning of analogue programmesDefinition of the feature settings Contrast+ Using the Contrast+ and NR Noise Reduction featuresUsing the Sleeptimer Feature Timer functionStore this is used to store the sound settings Picture and Sound SettingsDescription of the Picture settings Description of the Sound settingsDefinitions of PIP items Using the PIP Picture-in-Picture FeatureAccessing the PIP screen via the PIP menu Select Hdmi 1 or Hdmi 2 depending on connectionScreen Formats Using the Smart Picture and Sound Features Using the Active Control featureTeletext Teletext DoubleUsing the PC menus Using the TV as a PC MonitorSupported HD format Using the TV in HD High Definition ModeHD Install menu HD Picture and Sound settings HD FeaturesKey on the remote control Troubleshooting TipsWork Hdmi High-Definition Multimedia Interface GlossaryHelpline Centre Frequencies Table in KHzSpecifications Interference Connecting the aerialPositioning the TV General Points3139 125