Use of the remote control RC4333

Note: For most keys pressing a key once will activate the function. Pressing a second time will de-activate it.

Remark: in VGA mode only some keys are valid.

VCR DVD TV SAT AMP

BStandby

Press the SELECT key repeatedly to select one of the system modes in which the remote control can be used. If no action is being undertaken within 2 seconds, the remote control returns to TV mode. After an action in the selected system mode the remote control will remain in this mode for 60 seconds and will then return to TV mode.

VCR DVD TV SAT AMP

v SELECT†

® Ò ‡ π

Press to switch the TV on or off.

bTeletext On/Mix/Off see p. 12 Colour keys, see Teletext, p. 12.

OK Press this key

-to activate your choice, when in the menus;

-to display the channel list.

vSelect your peripherals

See p. 8.

†®Ò‡πº

Audio and Video equipment keys.

TV / PC / HD

Press one of these keys to switch the television between TV or PC mode (p. 13) or to select your connected Digital High Definition device.

Press HD once for HD-A (YPbPr); twice for HD-D (HDMI).

PIP (Picture in Picture) On/Off See p. 11.

VTo adjust the volume.

iOn Screen information

To display/remove the programme number, the name (if it exists), the time, the sound mode and the time remaining on the timer.

Hold down for 5 seconds to permanently display the programme number on the screen.The volume level and the smart control adjustments are then displayed each time they are used.

DSleeptimer

To select the length of time before the set automatically switches to standby (from 0 to 240 minutes).

ºb

	®
®	OK	®
	®
PIP		MENU
+		+
V ¬		P

- -

1 2 3

4 5 6

7 8 9

i	0	0
SLEEP	:	g
D	X h q
SMART		SMART

MENU Main menu on/off see p. 9

¬Interrupt the sound or restore it.

P Programme selection

To move up or down a programme. The number, (the name) and the sound modes are displayed for a few seconds.

For some TV programmes the title of the programme appears at the bottom of the screen.

0/9 Digit keys

To select a TV channel.

For a two digit programme number, enter the second digit before the dash disappears.To switch immediately to a selected one digit TV channel, keep the digit key pressed a bit longer.

0Previous TV channel

Press to display the previously selected TV channel.

:g Teletext keys, see p. 12.

XSound mode

To switch from Stereo or Nicam Stereo to Mono, or to choose between Dual Y or Dual Z in case of bilingual transmission.

When the sound mode is Mono, the indication is displayed in red.

hActive control On/Off/On with Sensor

Optimizes the quality of the picture according to the quality or reception.