Give name
It is possible to change the name stored in the memory or to assign a name to a TV channel or external for which a name has not yet been entered. A name with up to 5 letters or numbers can be given to the programme numbers 0 to 99. Note : It is not possible to rename the VGA source.
&Select Name in the Install menu and press the cursor right.
éSelect the programme number.
Note: keep the cursor up/down pressed to scroll through the programme list quickly.
“Select the following character with the cursor up/down.
‘Select the following position with the cursor right.
(Select the following character.
§Press the cursor left when finished.
èSelect another programme number and repeat steps é to §.
!Press the MENU key to return to the TV menu. Press again to exit the TV menu.
Note: space, numbers and other special characters are located between Z and A.
Editing of channels
This feature allows you to edit or skip channels from the channel list which have bad of weak signals or channels which you do not watch often. Note: Once a channel is skipped, you cannot select it with the
&Select Channel edit in the Install menu;
éPress the cursor right to enter the channel list.
“Select the channel you want to skip with the cursor left/right.
‘Press the cursor down to select Skipped On or Off.
(Press the cursor up/down to select another channel and repeat step ‘.
§Press the cursor left or the MENU key to return to the Install menu.
Note: To add back channels to the list, repeat steps & to ‘ and press the MENU key to switch menu off.
Features menu
Timer
This menu lets you use the TV set as an alarm.
&Press the MENU key.
éWith the cursor, select Features, then Timer.
“Time: enter the current time.
‘Start Time: enter the start time.
(Stop Time: enter the standby time.
§Channel: enter the number of the channel for the
èActivate: the settings include:
•Once for a single alarm;
•Daily for each day,
•Off to cancel.
!Display: press the cursor right to select On or Off, according to if you want to display the current time on the TV screen or not.
çPress the B key on the remote control to put the TV set in standby. It will automatically come on at the time programmed. If you leave the TV set on, it will just change programmes at the time entered (and will go to standby mode at the Stop Time).
Note: By combining the Child lock and Timer functions, you can restrict the period during which the TV set is used, for example by your children.
10