Philips 42PF9946 manual Hdmi High Definition Multimedia Interface connector

Devices with Progressive scan output (e.g. a digital Set Top box, a video game console or Progressive scan DVD player (480p, 576p, 720p or 1080i)

AV3

L
AUDIO	VGA
	Y/Pb/Pr (2Fh)

HDMIR

2

1

Connect the device with 2Fh YPbPr output to the VGA connector 1 (with the supplied adapter cable VGA to cinch) and to the L and R AUDIO jacks 2 of AV3.

See also the manual of your High Definition device.

Note: This television is designed to accept high definition signal standards 480p, 576p, 720p and 1080i as specified by the Electronic Industries Association standard EIA770.3.

Digital devices from different manufacturers have the possibility of differing output standards which may cause difficulties for the television to properly display.

Warning: In case you notice scrolling images, wrong colors or no colour, no picture, or even combinations of these on your screen, check if the connections are done in the correct way or move your digital device further away from your TV.

DVD

HDMI (High Definition Multimedia Interface) connector

	AV3
	L
	AUDIO
HDMI	R

HDMI is the leading new standard for Digital High Definition video and audio interconnection. Eg. with a Digital Set top box, with HDMI-equipped devices like a DVD-R,AV receiver...

Note: The HDMI connector does NOT support DVI devices with analogue audio.

The HDMI connector allows

- the following TV and monitor display modes:

EDTV	640/720 x 480p
	720 x 576p
HDTV 1920 x1080i
VGA	640 x 480	60 Hz
SVGA	800 x 600	60 Hz
XGA	1024 x 768	60 Hz

-uncompressed HD content

-encrypted or non encrypted signals.

Connect the digital HDMI output of your HD device (e.g. DVD player, Set Top Box..) to the HDMI connector of your TV.

Notes:

-Proper working is only guaranteed with HDMI compliant consumer products.

-Digital devices from different manufacturers have the possibility of differing output standards which may cause difficulties for the television to properly display;

-If the set is cold, there may be a small “flicker” when the set is turned on. This is normal, there is nothing wrong with the set.

7