2 Press to select [Switch On Settings] (Switch on setting). Select one of the following options:
• [Switch On Vol] (Switch on volume): Presets the volume.
• [Max Volume] (Maximum volume): Presets the maximum volume that a guest can select.
• [Switch On Ch] (Switch on channel): Presets the channel that is displayed when the TV is switched on.
• [Picture Format] (Picture format): Presets the picture format.
• [Power On] (Power on): Presets the power mode.
• [Smart Power] (Smart power): Presets the power savings mode.
• [Display Msg] (Display message): Enables or disables the display of a welcome message.
• [Welcome Msg] (Welcome message): Specifies a welcome message.
• [Set ID] (Set ID): Specifies an ID for signage applications. This option appears only if you select [Application] > [Signage] from the PBS setup menu.
PBS Mode
Application Consumer Setup
Switch On Settings
Control Settings
Blank Channel
Pay-tv Setup Multi RC Smart RC Store
USB to TV TV to USB Reset
Switch On Vol
Max Volume
Switch On Ch
Picture Format Power On Smart Power Display Msg Welcome Msg Set ID
Configure the settings for switch-on
You can configure settings (such as volume, channel, picture format, etc) that are used as default, when the TV is switched on.
1 Enter the PBS setup menu.
PBS Menu
Preset the switch-on volume
1 Enter the PBS setup menu.
2 Press 
to select [Switch On Settings] > [Switch On Vol]. Select one of the following options:
• [Last Status] (Last status): Select [Off] (Off ) to switch the TV on at a user defined volume. Select [On] (On) to switch the TV on at the last volume setting.
• [User Defined] (User defined): Press
to set the volume that is used when the TV is switched on.
3 Press 
to return to the previous screen.
Preset the maximum volume
1 | Enter the PBS setup menu. |
2 | Press | to select and enter [Switch |
3 | On Settings] > [Max Volume]. |
Press | to set the maximum volume |
4 | that a guest can select. |
Press | to return to the previous screen. |
Preset the switch-on channel
1 Enter the PBS setup menu.
2 Press 
to select [Switch On Settings] > [Switch On Ch]. Select one of the following options:
• [Last Status] (Last status): Select [Off] (Off ) to switch the TV on at a user defined channel. Select [On] (On) to switch the TV on at the last viewed channel.
• [User Defined] (User defined):
Press 
to set the channel that is displayed when the TV is switched on.
3 Press 
to return to the previous screen.
