Preset the picture format
1 | Enter the PBS setup menu. | |
2 | Press | to select [Switch On |
Settings] > [Picture Format].
3 Press 
to select one of the available picture formats.
4 Press 
to return to the previous screen.
Preset the power mode
1 Enter the PBS setup menu.
2 Press 
to select [Switch On Settings] > [Power On]. Select the power mode that is used when the TV is switched on from the mains:
• [Standby] (Standby): The TV is switched on in standby mode.
• [On] (On): The TV is switched on.
• [Last Status] (Last status): The TV is switched on to the last used power mode.
3 Press 
to return to the previous screen.
Use Smart power
Smart power enables you to display picture | ||
with significant power savings without | ||
compromising the picture quality. | ||
1 | Enter the PBS setup menu. | |
2 | Press | to select [Switch On |
| Settings] > [Smart Power]. Select one of | |
| the following options: | |
| • [Off] (Off): Disables Smart Power. | |
| • [Low] (Low): Displays the picture | |
| with least power savings. | |
| • [Medium] (Medium): Displays the | |
| picture with medium power savings. | |
| • [High] (High): Displays the picture | |
3 | with maximum power savings. | |
Press | to return to the previous screen. | |
Display a welcome message
1 Enter the PBS setup menu.
2 Press 
to select [Switch On Settings] > [Display Msg]. Select one of the following options:
• [Off] (Off): Disables the display of a welcome message.
• [On] (On): Enables the display of a welcome message for a
3 Press 
to return to the previous screen.
Set a welcome message
1 Enter the PBS setup menu.
2 Press 
to select [Switch On Settings] > [Welcome Msg]. Select one of the following to set or clear a welcome message:
• [Line 1] (Line 1): Press 
to enter the first line of the welcome message.
• [Line 2] (Line 2): Press 
to enter the second line of the welcome message.
• [Clear] (Clear): Clears the welcome message.
• [Msg Timeout] (Message timeout): Set the display time to 20, 25 or 30 seconds.
3 Press 
to return to the previous screen.
Tip
••You can have a maximum of 20 alphanumeric characters in each line of your welcome message.
Set ID
1 | Enter the PBS setup menu. | |
2 | Press | to select [Switch On Settings] > |
[Set ID].
3 Press 
to adjust the ID to a number between 0 - 63.
4 Press 
to return to the previous screen.
Note
••Available only in public signage applications.
8EN