2675.1 eng
Enter the setup code directly
‡Press the DVD, STB or HTS key for 4 seconds
to select the device mode you need.
The selected mode key will light up constantly.
®Enter the
If you entered the correct code, all mode keys will blink to confirm the selection.
If you entered a wrong code, all mode keys will
light up for 2 seconds. Repeat Step 2 with a different code.
ÒPoint the remote control at the device, and press B to test if the code is correct for your device.
If successful try whether all functions can be operated. If not succesful, or if not all functions can be operated, repeat Step 1 and 2 with one of the other setup codes for your manufacturer.
Automatic search of all codes
If you are not successful in finding the correct brand or code, you can try an automatic search of all codes. The automatic search might take several minutes.
If after the automatic search no code is successful, the remote control will likely not be able to operate your particular device. In such case, use the device's own remote control.
‡Switch on the device you want the TV remote control to set up for.
®. Point the remote control to the device.
ÒTo select the device mode you need, press the DVD, STB or HTS key for 4 seconds.
The selected mode key will light up constantly.
†Press OK to start the automatic search. Every two seconds, when a new code is sent, the B key will blink.
Keep pointing the remote control to the device.
ºWhen the device switches off, press OK to stop the search.
◊Press B to switch on your device.
‹Use the remote control keys to try if all
functions can be operated.
If not all functions can be operated, press OK again to continue the automatic search for a correct code.
≈If all functions can be operated, press the currently selected device mode key to confirm and to quit the automatic search.
rNote:
To pause the automatic search, press OK. Press the navigation key up or down to search for the codes one by one backward or forward to locate the
correct code for your device or press OK again to continue the automatic search.
5.1.4Operate DVD, Set-Top Box and
Home Theater devices
‡Press the DVD, STB or HTS key to set the remote control to operate the device you need.
®Use the TV remote control to operate the device.
If the keys do not operate the selected device,
a setup is required to programme the remote control for your specific brand and type of device. See section 5.1.3
ÒPress the TV key to return to normal TV mode. When not used, the remote control will switch
back to TV mode after 30 seconds.
| DEMO |
|
|
|
| GUIDE |
|
OPTION | OPTION | a | a |
|
| ||
|
| OK |
|
|
| LIST |
|
MENU | MENU | b |
|
BROWSE |
|
|
+ | + |
| + | + | |
| ¬ |
| |||
| - |
| - |
| |
- | V |
| P | - | |
1 | 2 | 3 | |||
|
| ||||
V | 4 | 5 | 6 | P |
7 8 9
i | 0 |
| R |
|
|
|
| † | Ò |
Ò | ‡ | π | † |
|
| MHEG CANCEL |
|
|
|
®j b q
When the remote control is selected for a particular device all keys have the same function except the keys mentioned here.
•DVD player, DVD recorder,
P+/- = DVD Next/Previous track
•Philips DVD Recorder (setup code 004)
Òkey = DVD previous track
†key = DVD next track
•Philips DVD recorder with HDD (setup code 005)
Option key =
Òkey = DVD-R HDD previous track
†key = DVD-R HDD next track
16 | Use more of your TV |