Philips 42HF9320A manual Sound, Hdmi connections, USB connection, If your problem is not solved

Page 56

2675.1 eng 03-08-2007 14:51 Pagina 48

The picture position on screen is not correct

Some picture signals from some devices do not fit the screen correctly. You can shift the picture with the navigation key on the remote control. Check the signal output of the device.

Sound

There is a picture but no sound

Verify the volume is not set to 0.

Verify the sound has not been muted with the ¬ key.

Verify if all cables are connected properly.

If no sound signal is detected, the TV automatically switches off the sound.

This is proper operation and does not indicate malfunction.

The sound is poor

Verify if the sound is set to Stereo.

Verify the Equalizer settings.

Select any of the Reset to standards settings in the Reset to standard menu. See section 5.3.2.

The sound comes from one speaker only

Verify if the Balance is not set to extreme left or right.

HDMI connections

Trouble with devices connected with HDMI

The HDMI - HDCP procedure might take a few seconds before the TV shows the picture from a device.

If the TV does not recognise the device and the screen shows no picture, try switching from one device to another and back again to restart the HDCP procedure.

If sound interruptions occur persistently, see the user manual of the device to verify the output settings. If that does not help, connect an additional audio cable.

If an HDMI-to-DVI adaptor is used, verify if an additional audio connection is in place to complete the DVI connection.

USB connection

The TV does not show the USB device content

Set your device (camera) to ‘Mass Storage Class’ compliant.

The USB device may need specific driver software. Unfortunately this software can not be

downloaded to your TV.

I can not see my files in the Multimedia menu.

Not all audio and picture files are supported. See section 8 Technical data.

Audio and picture files do not playback smoothly

The transfer performance of the USB device limits the transfer rate.

Personal computer

The PC display on my TV is not stable or is not synchronised

Verify if the correct resolution mode is selected on your PC. See section 8 Technical data.

If your problem is not solved

Switch your TV off and on again. If the problem is not solved, call the Customer Support Centre or consult our website www.philips.com/support.

See the Customer Support Centre telephone numbers on the last page of this user manual.

Please, have the TV Model and Product Number ready before you call.

You can find these numbers on the packaging label or on the typelabel on the back and bottom of the TV.

)Warning

Never try to repair the TV yourself.

48

Troubleshooting

Image 56
Contents Hospitality Television 42HF9320A Installation of your Philips Hotel TV Switch on Settings Standby Last Status Cloning of settings Installation Procedure consists of three simple steps Problems and Solutions Disposal of your old product Table of contents Warranty Safety RecyclingCare of the screen EEC 2002/96/ECSide connectors Back connectorsYour TV Television overviewPosition the TV Getting startedProduct highlights Unmounting the TV stand Wall mountingMounting the wall mount bracket 30kg Vesa compliant mounting Remote control batteries Connect the mains cord First time installationAntenna cable RNoteUse your TV Switch on or off StandbyTo switch off Press B Power at the side of the TV Switch channels Adjust volumeWatch TV Watch channels from a digital receiverTip Watch a DVDSelect a Teletext Change Ambilight mode TV standby with AmbilightUse more of your TV Remote controlRemote control overview Set-Top Boxes and Home Theater Systems This TV remote control can operate DVD devicesOperate other Audio/Video devices Enter the setup code directly Back to TV mode after 30 secondsAutomatic search of all codes Operate DVD, Set-Top Box Home Theater devicesMenu Keep the remote in the chosen mode permanentlyTV menu overview Use of the menu Picture and Sound settings Quick access menuSettings assistant Reset to standardsPicture settings ‡ Press q to switch on the Picture format menu Sound settings This section describes how to adjust all sound settingsPress navigation key up or down to select a setting Audio languageThis section describes how to adjust Ambilight settings AmbilightTeletext Select pagenumber subpagesDigital text services UK only Search teletextEnlarge teletext pages Teletext menuSelect a channel from a favourite list Create favourite channel listsSelect a favourite list Switch on EPG Electronic Programme Guide EPG‘7 or 8 day’ EPG More on ‘7 or 8 day’ EPGTimers and locks To switch off the On timer, select Off in the On timer menuActivate or deactivate subtitling SubtitlesSubtitling from analogue TV channels Slideshow settings View and play photos, MP3Insert a USB device Remove the USB device ç CautionListen to music Music settingsThumbnails Software update Update assistantUpdate assistant helps you to update the TV’s software Listen to radio channelsTransfer of the downloaded software update to the TV Update process starts automatically. Please waitPress B on the remote control Software download from the PC to the USB deviceSoftware update by digital broadcast DVB-T Channel installation Automatic installationAnalogue Manual installation Rearrange stored channelsFactory settings Uninstall or reinstall a channelAutomatic Channel management Digital reception testBack connectors Second scart connectorConnections Connection overviewAbout connecting YPbPr can handle HD TV signals Component VideoHdmi Highest quality Hdmi with CEC if presentRed, White Display synchronised audio outAn S-Video cable Connect your devices DVD playerDVD Recorder and Home Theatre System DVD Recorder and DVD Home Theatre SystemSatellite receiver Use a scart cable and 2 antenna cablesHD Digital receiver / HD satellite receiver Use a Hdmi cable and 2 antenna cablesDVD-R, Home Theatre System and Digital receiver Blu-ray Disc player Use a Hdmi cableFor supported PC monitor resolutions, see Technical data Game consoleCamcorder Personal ComputerConnections setup Digital Audio In if presentAudio In L/R Naming your devicesCommon interface menu Preparing for digital servicesInsert a Conditional Access Module Technical data Height 715 mm Depth 130 mm Weight 39,2 kg TV + stand WidthTroubleshooting Television and remote controlTV channels PictureIf your problem is not solved SoundHdmi connections USB connectionIndex Shift OK key Switch on On timer Set codeMono Mute keyDVD modes STB ModesHTS mode NECAsci SEG