Connecting a
Connecting the TV to the internet using a USB wireless LAN adapter
IN 
AUDIO L/R + VIDEO
Cable
OUT
RF IN 
USB wireless LAN adapter
WAN
Wireless LAN
Access Point(AP)
(e.g. wireless router)
Internet |
|
| LAN |
Network equipment | Ethernet cable |
| |
(modem, etc.) |
|
Note
•Only the left loudspeaker reproduces sound for mono equipment. Use a mono to stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.
•When you connect cables, match the cable colors to the connectors on the TV.
Connecting the TV to the internet using an Ethernet cable
LANWAN
1 2 3 4 5
Hub or
broadband router
Ethernet cable
Internet |
|
| LAN |
Telecommunications | Ethernet cable |
| |
equipment (modem, etc.) |
|
Note
Note
•After connecting a USB wireless LAN adapter, set up necessary network settings. (For the network setup, refer to ‘Network’ on page 30.)
•This unit is compatible with the supplied USB wireless LAN Adapter only. (Commercially available USB wireless LAN adapters are not supported.)
•Do not insert the supplied USB wireless LAN adapter when the unit is turned on. Please insert the USB wireless LAN adapter when the unit is in the standby mode or turned off.
•Use a Wireless LAN Access Point (AP) (e.g. wireless router) which supports IEEE 802.11 b/g/n.
(n is recommended for stable operation of the wireless network.)
•This unit does not support
•Other radio devices or obstacles may cause interference to the wireless network connection.
•Do not use an extension cord and USB Hub to connect devices to this unit. Always insert the USB flash memory or the supplied USB wireless LAN adapter in to this unit directly.
Connecting a digital home theater amplifier using a digital audio coaxial cable
•Please purchase shielded Ethernet cables at your local store and use them when you connect to network equipment.
•After connecting an Ethernet cable, set up necessary network settings. (For the network setup, refer to ‘Network’ on page 30.)
•Do not insert any cable other than an Ethernet cable to the Ethernet port to avoid damaging the unit.
•If your telecommunications equipment (modem, etc.) does not have broadband router functions, connect a broadband router.
•If your telecommunications equipment (modem, etc.) has broadband router functions but there is no vacant port, use a hub.
•For a broadband router, use a router which supports
•Do not connect your PC directly to the Ethernet port of this unit.
OUT 
Note
DIGITAL AUDIO
IN
digital home theater amplifier
•Due to Copyright restrictions, the broadcaster may choose to mute PCM audio over Digital Audio Output for certain channels, shows or segments during the broadcast.
40EN