Step 2: Download and update the latest software version
1 Connect a USB storage device.
2 Press .
3 Select [Setup] > [Update software].
4 Follow the instructions to load a file onto your USB storage device.
5 Connect the USB storage device to your computer, then
»»A Web page is launched.
6 Follow the instructions in the Web page.
• If the current software version matches the latest software update file, you do not need to update your TV software.
• If the current software version is smaller than the latest software update file, download the latest software update file to the root directory of your USB device.
7 Disconnect the USB storage device from the computer.
Change TV preferences
Use the preferences menu to customize your TV settings.
1 Press .
2
3 Select one of the following, then press OK.
•[Menu language]: Select a menu language.
•[Sleep timer]: Switch the TV to standby after a
•[Location]: Optimize TV settings for your location - home or shop.
•
Switch the
•[Volume bar]: Display the volume bar when you adjust the volume.
•[Auto switch off]:To conserve energy, set the TV to switch off automatically after a period of inactivity.
| • [Channel information size]: Change |
| the type of information that is |
| displayed when you switch channels. |
| • [Universal access]: Enable or disable |
| the universal access menu. |
| • [Key beep]: Enable audio feedback |
| when you press buttons on the |
| remote control or TV. |
| • [Audio out delay]: Automatically sync |
| the image on your TV to the audio |
| from a connected Home Theater. |
| • [TV position]: Apply the best settings for |
| your TV based on how it is mounted. |
| • [Clock]: Display or remove the time |
4 | from the TV, and sets clock options. |
To exit, press . |
Start a TV demo
You can use demonstrations to better understand the features of your TV. Some demos are not available on certain models.
Available demos are displayed in the menu list. | |
1 | While you watch TV, press . |
2 | Select [Setup] > [Watch demo], OK. |
3 | Select a demo and press OK to view it. |
4 | To exit, press . |
Reset the TV to factory settings
You can restore the default picture and sound | |
settings of your TV.The channel installation | |
settings remain the same. | |
1 | Press . |
2 | Select [Setup] > [TV settings] > [Factory |
3 | settings], then press OK. |
If you are prompted to enter a code, enter | |
| the |
| code' on page 19). |
4 | »»A confirmation message is displayed. |
Press OK to confirm. |
EN 23