Use one-touch play control
If you connect multiple
Caution
•• This is an advanced setting. Devices that do not support this setting will not respond to the TV remote control.
1 Press .
2 Select [Setup] > [TV settings] > [EasyLink] > [EasyLink remote control].
3 Select [On] or [Off], then press OK.
Use one-touch standby
When you press on the TV remote control,
the TV and all | |
switch to standby mode. | |
1 | Press |
device's remote control.
»»The TV and all connected HDMI devices switch to standby.
Set TV speakers to EasyLink mode
If you connect an
When you play content from an EasyLink compliant home theater, if you want to mute the TV speakers automatically, turn on EasyLink mode.
If the connected device is HDMI Audio Return Channel (ARC) compliant, and you connect the device through an HDMI ARC connector, you can output TV audio through the HDMI cable. You do not need an additional audio cable.
1 Make sure that the
2 Select [Setup] >[TV settings] > [EasyLink] > [TV speakers].
3 Select one of the following, then press OK.
•[Off]: Switch off TV speakers.
•[On]: Switch on TV speakers.
•[EasyLink]: Stream TV audio through the connected
•[EasyLink autostart]:Turn off TV speakers automatically and streams TV audio to the connected
Note
•• To mute the TV speakers, select [TV speakers] > [Off].
Select speaker output with Adjust menu If [EasyLink] or [EasyLink autostart] are selected, access the adjust menu to switch the TV audio.
1 While you watch TV, press ADJUST.
2 Select [Speaker], then press OK.
3 Select one of the following, then press OK:
•[TV]: On by default. Stream TV audio through TV and the connected HDMI- CEC audio device until the connected device switches to system audio control.TV audio is then streamed through the connected device.
•[Amplifier]: Stream audio through the connected
30EN