Philips 40PFL3606D, 40PFL4606D Install channels, Automatically install channels, Rename channels

Select [On] to enable the automatic update or select [Off] to disable it.

Select [Setup] > [Channel settings] > [Channel installation] > [Automatic channel update].

6 Install channels

The first time you setup your TV, you are prompted to select a menu language and to install TV and digital radio channels (if available). Afterward, you can re-install and fine tune channels.

Automatically install channels

You can search and store channels automatically.
1	Press .
2	Select [Setup] > [Search for channels],
3	then press OK.
	Select [Reinstall channels], then press OK.
4	Select a connection, then press OK.
5	»»The channel installation guide begins.
	Select [Start], then press OK.

»»All available channels are stored. 6 To exit, press OK.

Update the channel list

You can enable automatic update of channels when your TV is in standby mode.The channels stored in your TV are updated every morning according to the channel information in the broadcast.

1 Press .

2

3

4 To return, press .

Select antenna or cable connection

1	Press .
2	Select [Setup] > [Channel settings] >
3	[Channel installation] then press OK.
	Select a connection, then press OK.
4	To return, press .

Rename channels

You can rename channels.The name appears
when you select the channel.
1	While you watch TV, press FIND.

»»The channel matrix menu is displayed.

2	Select the channel to rename.
3	Press	OPTIONS.
4	»»The channel options menu is displayed.
	Select [Rename channel], then press OK.
5	To display the text input box, press OK.
6	For each character, select a character, then
	press OK.
	• To select uppercase letters, lowercase
	letters, or symbols: In the row below
	the space key, select the respective key,
7	then press OK.
	When complete, select [Done], then press
	OK.
8	»»The text input box closes.
	In the rename channel menu, select
	[Done], then press OK.

24EN