Philips 32PF4311S, 26PF4311S manual Troubleshooting Tips, Key on the remote control

Troubleshooting Tips

Below is a list of symptoms you may encounter with your TV. Before you call for service, make these simple checks.

Symptom	Possible Causes		What you should do
No display on screen	•	Faulty power supply	•	Check whether power cord is properly connected
	•	TV’s Power not turned		into the mains socket and to your TV. If there is still
				no power, on disconnect plug. Wait for 60 seconds
				and re-insert plug. Switch on TV again.
			•	Press the	key on the remote control.
Poor reception	•	Faulty antenna connection	•	Check antenna connection at rear of TV.
(snowish picture and	•	Weak transmission	•	Try manually adjusting your picture (refer to page 8).
noise	•	Wrong TV system	•	Have you chosen the right TV system? (refer to page 8).
No picture	•	Faulty aerial and cable	•	Check whether euroconnector cables or aerial
				sockets are properly connected.
	• Wrong source selected		• Check whether the source is correctly selected.
				Press	button to enter Source list and select
				the correct source.
No sound on	• Wrong TV system		• Check whether the correct TV system is selected
certain channels				(refer to page 8).
No sound	• Zero volume level		• Try increasing volume.
	• Sound muted		• Check that the mute (			) mode is not on. If mute
				mode is on, press the		key to deactivate mute
				mode.
			• Aim remote control directly at sensor on front of TV.
	• Headphone is connected		• Disconnect headphone connection.
Sound interference	• Electrical appliances		• Try switching off any electrical appliances, for
		interference		example, hairdryer, vacuum cleaner that are in use.
Unable to understand	• Wrong language selected		• Press the		key to exit menu from screen. Press
the language on		accidently		the	key to enter main menu. Use the ï key
screen to operate set				to select the fourth item on the main menu. Use
				Æ /	key to enter into the next menu level and
				the Í Æ key to select correct language.
TV not responding	• Wrong placement of		• Check the placement of the batteries.
to remote control		batteries
	• Flat batteries		• Try changing the batteries.
Occasional appearance	• Characteristic of liquid		• This symptom is not a problem. The liquid crystal
of red, blue, green		crystal panel		panel is built with very high precision technology
and black spots on				giving you the fine picture details. Occasionally, a few
screen				non-active pixels may appear on the screen as a fixed
				point of red, blue, green or black. Note that this
				does not affect the performance of the set.
Intermittent or	• * HDCP (see glossary)		• Noise is displayed if the connected digital equipment’s
flickering picture on		authentication failed		(DVD player or Set-Top box) *HDCP authentication
in HD mode				failed. Check user manual for the digital equipment
				you are connecting.
			• Use a standard HDMI to DVI cable.
No sound or picture but	• Set on standby mode		• Press the		key on the remote control.
front panel red light is
on

17