Philips 26PF4311S manual Safety Information, 10 cm, To prevent fire or shock hazard, do not expose

Page 3

Safety Information

 

10 cm

10 cm

10 cm

Leave at least 10 cm around each side of the TV set to allow for proper ventilation. Place the set on a stable, level surface. Never cover the ventilation slots of the TV with a cloth or other material. It may cause overheating. Do not insert anything in the ventilation holes. If metal or something flammable is inserted in these holes, it may result in fire or electric shock.

X

Take care not to connect too many equipment to the same mains socket as it may cause overloading resulting in fire or electric shock.

X

When cleaning the surface or the screen of the set, wipe gently with absorbent cotton or cloth or other soft material like chamois. Do not use too wet a cloth which is dripping with water.

Do not use acetone, toulene or alcohol to clean the TV. As a safety precaution, unplug the power cord from the mains.

X

Pull the power lead by the plug. Do not pull on the power lead. Do not use a poor fitting mains socket. Insert the plug fully into the mains. If it is loose, it may cause arching and result in fire.

X

X

To prevent fire or shock hazard, do not expose

No naked flame sources (lighted candles) should

be placed on the top of the set or near it.

your TV to rain or moisture.

 

X

Avoid placing your TV set under direct sunlight or heat.

Installation of the TV set on the wall should be carried out by qualified serviceman. Improper and incorrect installation may render the set unsafe.

As a safety precaution, do not touch any part of the TV, power lead or aerial lead during lightning storms.

X

Avoid placing vase filled with water on the TV. Water spilled into the set could result in electric shock. Do not operate set if water is spilled into it. Have it checked immediately by a qualified serviceman.

2

Image 3
Contents 26PF4311S 32PF4311S Introduction Table of ContentsBe placed on the top of the set or near it Safety Information10 cm To prevent fire or shock hazard, do not exposePreparation / Getting started Switching on the TV set ConnectionsInputs Televison keys and connectorsFor more details on connections, see Connection Guide Program / Channel -/+ to select programmesRemote Control keys Remote Control keys DVD or AUX Quick InstallationFast forward Confirms selection Record Digit keys Selecting the language Install menuProgram Sort Auto StoreNaming of Channel Manual StoreStore this is used to store the sound settings Picture and Sound SettingsDescription of the Picture settings Description of the Sound settingsUsing the Contrast+ and NR Noise Reduction features Timer functionDefinition of the feature settings Contrast+ Definitions of PIP items Using the PIP Picture-in-Picture featureAccessing the PIP screen via the PIP menu Select Hdmi 1 or Hdmi 2 depending on connectionSuperzoom Screen FormatsMovie expand Subtitle ZoomUsing the Active Control feature Using the Smart Picture and Sound featuresEnlarge a TeletextHidden InformationUsing the TV as a PC Monitor Using the PC menusSupported PC Resolutions Supported HD format Using the TV in HD High Definition ModeHD Install menu HD Picture and Sound settings HD FeaturesKey on the remote control Troubleshooting TipsGlossary Specifications