Philips 26PFL4507, 22PFL4507, 32PFL4507 Initial setup, Home, Press OK to finish Settings assistant

These operations are accessible by remote control.

Some may also be accessible by control panel on the main unit.

Initial setup

This section will guide you through the unit’s initial setting which includes selecting a language for your on-screen menu and autoprogram, which automatically scans and memorizes viewable channels.

Before you begin:

Make sure the unit is connected to antenna or cable.

1 After making all the necessary connections, press to Turn On the unit.

• It may take a few moments to Turn On the unit for the first time.

• Initial setup menu appears automatically after the unit is Turned On.

2 Use ▲▼ to select the on-screen language from the choices (English / Español / Français) on the right side of the TV screen, then press OK.

3 Use ▲▼ to select Antenna for TV channels or Cable for CATV channels, then press OK.

Initial setup

Make sure the antenna is connected to ‘’ANTENNA IN’’ jack.				Antenna
Select your signal source.				Cable
Antenna				Skip
Cable	Or
		ANTENNA IN
Select	OK		Back	Skip

––When Antenna is selected, the TV detects antenna signals. It searches for DTV and Analog TV channels available in your area.

––When Cable is selected, theTV detects signals supplied by cable. It searches for DTV,AnalogTV and Cable channels available in your area.

•Autoprogram will begin.

Initial setup

Please wait while the system is scanning for channels. Auto programming may take more than 20 minutes to complete.

0%

Digital channels	0 ch
Analog channels	0 ch
	Skip

12 English

4Use ▲▼ to select the desired location setting, then press OK. Home is ENERGY STAR® qualified setting.

Initial setup

	Retail
Location Home is recommended for normal home use	Home
and is ENERGY STAR qualified.
In the Retail Store mode, all settings are fixed.

Select OK

•	Select Retail, the unit will be set up with predefined setting
	for retail displays. In this setting, the power consumption may
	possibly exceed the limited requirement of the ENERGY STAR®
	qualification.
•	Select Home, the unit is set to maximize the energy efficiency
	for home setting and it can be adjusted through a choice of
	picture and sound quality according to your preference. Use this
	setting to remove the E-sticker if visible from the display. ➠ p. 27
5 When you select Home, press OK to begin Settings assistant.
			Settings assistant
		Settings assistant helps you customize picture settings.
		You will see a series of test pictures where the right side and
		left side differ. Select the side that is most pleasing to you
		with the Left/ Right keys.
		Next	Back	Exit

6Press Í or Æ 3 times to select the side of the pictures that is the most pleasing to you, then press OK.

Left side Right side

1/3 Select the picture setting that you prefer.

Select Next Back Exit

7Press OK to finish Settings assistant.

Settings assistant

You have set up your viewing preferences.

Store BackExit

•When the initial setup is completed, the lowest memorized channel with the confirmation message of the location setting will be displayed on the TV screen.

•You must set Home in step 4. Otherwise, Picture and Sound settings you adjusted will not be memorized after the unit goes into Standby mode.

Continued on next page.